Interfacial Integrity and Debonding Behavior of Multilayer Casing/Cement Systems under Thermal Recovery Conditions
SPE Journal · 01.11.2026 · 1-21
DOI: 10.2118/237355-pa ↗Kurz gefasst
Fachartikel in der Zeitschrift SPE Journal, online erschienen am 18.11.2026. Verfasst von Hongchuan Zhao und 5 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben.
Abstract (Originalsprache)
In offshore heavy oil thermal recovery, cyclic steam stimulation (CSS) subjects the wellbore to high-temperature and high-pressure loading, which causes debonding or cracking in the casing/cement/formation system and threatens wellbore integrity. Traditional methods for evaluating interfacial contact forces are usually limited to simplified three-layer models, failing to capture the complexity of multilayer systems. This study presents an improved matrix-based method for efficiently assessing interfacial contact forces in multilayer casing/cement systems, which accounts for coupled thermal and mechanical effects. The model is numerically verified against finite element simulations, with an average relative error of 2.3% in radial stress prediction. Furthermore, full-scale casing cutting and pulling tests were conducted on three offshore wells to estimate the apparent interfacial shear strength of poorly cemented intervals under the specified field test conditions. The mean apparent interfacial shear strength in poorly cemented upper wellbore intervals was 0.0065 MPa, significantly lower than typical laboratory values. Numerical analysis results show that the radial stress at the P1 and P3 interfaces is notably higher than that at the P2 and P4 interfaces, and this disparity becomes more significant as the temperature increases. Mechanical analysis demonstrates that interfacial friction plays a dominant role in maintaining interfacial integrity, with modeled frictional resistance up to approximately three orders of magnitude higher than the baseline interfacial resistance at elevated temperatures; thermal and mechanical loads affect interface behavior in fundamentally different ways. A case study of Well X gives model-estimated initial debonded lengths of 1.2 m for the 9 5/8-in. casing and 0.7 m for the 13 3/8-in. casing under the prescribed loading conditions. These estimates have not been validated against direct field observations of debonded length. The proposed framework provides an analytical means of calculating interfacial contact forces and estimating initial debonding length under the stated assumptions; further field validation is needed before these length estimates are used to inform well design decisions.
Zitieren
APA
Zhao, H., Wang, Y., Liu, H., Gao, D., Wang, K., & Zhang, B. (2026). Interfacial Integrity and Debonding Behavior of Multilayer Casing/Cement Systems under Thermal Recovery Conditions. SPE Journal, 1-21. https://doi.org/10.2118/237355-pa
Vancouver
Zhao H, Wang Y, Liu H, Gao D, Wang K, Zhang B. Interfacial Integrity and Debonding Behavior of Multilayer Casing/Cement Systems under Thermal Recovery Conditions. SPE Journal. 2026:1-21. doi:10.2118/237355-pa
BibTeX
@article{Zhao2026,
author = {Zhao, Hongchuan and Wang, Yanbin and Liu, Huazeng and Gao, Deli and Wang, Kongyang and Zhang, Binqi},
title = {Interfacial Integrity and Debonding Behavior of Multilayer Casing/Cement Systems under Thermal Recovery Conditions},
journal = {SPE Journal},
year = {2026},
pages = {1--21},
doi = {10.2118/237355-pa}
}
EUVIMED