EUVIMEDEUVIMED entdecken
Crossref

Rapid Inversion of Fracture Height, Width, and Net Pressure from Post-Hit Fiber-Optic Strain Using an Analytical Strain Model

Ming Chen, Xingyu Hu, Tiankui Guo, Yongzan Liu, Shujie An, Linsen Zhan

SPE Journal · 01.11.2026 · 1-16

DOI: 10.2118/237008-pa ↗

Kurz gefasst

Fachartikel in der Zeitschrift SPE Journal, online erschienen am 16.11.2026. Verfasst von Ming Chen und 5 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Distributed fiber-optic strain recorded in offset wells after the fracture intersects the fiber (post-hit strain) provides useful information about fracture geometry. However, simultaneously inverting fracture geometry parameters such as fracture height and width in real time from strain recorded in adjacent horizontal monitor wells remains a major challenge. To address this challenge, exploiting the plane-strain nature of the fracture-induced strain after post-hit, a nonlinear inversion model is built upon the Sneddon plane-strain analytical solution. The model is solved by the Levenberg-Marquardt (L-M) algorithm combined with a multistart strategy and Markov Chain Monte Carlo (MCMC) method to achieve global optimization. Using synthetic strain data with added measurement error, the accuracy and uncertainty of simultaneously inverting net pressure, fracture height, and fracture width are systematically analyzed. The inversion accuracy and computational efficiency of three forward models—single-element, multi-element discrete 2D displacement discontinuity method (2D DDM), and the Sneddon analytical solution—are compared, and the applicability of the plane-strain and constant-pressure assumptions is evaluated. Finally, the method is applied to field data from the Hydraulic Fracturing Test Site-2 (HFTS-2) in the United States. The results show that, with the analytical forward model, both L-M and MCMC complete an inversion within seconds, enabling real-time inversion for field monitoring data. Under sufficient near-field and far-field strain data and plane-strain conditions, the analytical-model-based inversion method can simultaneously and accurately invert the net pressure, fracture height, fracture width, with strong robustness to noise types and magnitudes. The asymmetric offset can hardly be reliably resolved from single-fiber strain of the horizontal monitoring well alone. Young’s modulus E only affects the inversion result of net pressure. The inversion using the single-element DDM model yields low accuracy, while the multi-element discrete 2D DDM model is computationally expensive. When fracture height approaches or equals fracture length, the plane-strain assumption is largely violated, leading to insufficient accuracy; when the net pressure is nonuniform, the inversion still provides reasonable estimates of net pressure, fracture height, and width. The synthetic and field tests together confirm that the proposed method offers a feasible and efficient route to quantitative interpretation of net pressure, fracture height, and fracture width from post-hit fiber-optic strain.

Zitieren

APA

Chen, M., Hu, X., Guo, T., Liu, Y., An, S., & Zhan, L. (2026). Rapid Inversion of Fracture Height, Width, and Net Pressure from Post-Hit Fiber-Optic Strain Using an Analytical Strain Model. SPE Journal, 1-16. https://doi.org/10.2118/237008-pa

Vancouver

Chen M, Hu X, Guo T, Liu Y, An S, Zhan L. Rapid Inversion of Fracture Height, Width, and Net Pressure from Post-Hit Fiber-Optic Strain Using an Analytical Strain Model. SPE Journal. 2026:1-16. doi:10.2118/237008-pa

BibTeX
@article{Chen2026,
  author = {Chen, Ming and Hu, Xingyu and Guo, Tiankui and Liu, Yongzan and An, Shujie and Zhan, Linsen},
  title = {Rapid Inversion of Fracture Height, Width, and Net Pressure from Post-Hit Fiber-Optic Strain Using an Analytical Strain Model},
  journal = {SPE Journal},
  year = {2026},
  pages = {1--16},
  doi = {10.2118/237008-pa}
}
Kostenlos starten →