Assessing “Passive” and “Active” Killing Approaches for Offshore-Well Blowouts by Integrating Reservoir Depletion with Near-Wellbore Geomechanics
SPE Journal · 11.11.2026 · 31 (11) · 7421-7439
DOI: 10.2118/236620-pa ↗Kurz gefasst
Fachartikel in der Zeitschrift SPE Journal, online erschienen am 14.09.2026. Verfasst von Abdelhakim Khouissat und 1 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben.
Abstract (Originalsprache)
During a kick’s evolution to a blowout, the well’s bottomhole pressure (BHP) decreases, which can destabilize the borehole walls, leading to their collapse and potentially triggering the developing blowout’s “passive” killing (self-killing) via bridging. Otherwise, an “active,” well-capping strategy becomes necessary, involving the installation of a subsea-capping stack (SCS) to facilitate the blown and discharging well’s shut-in, implemented with the appropriate measures to prevent dangerous “underground blowouts” (that can lead to dangerous seafloor broaches) induced by tensile failures on the borehole walls. In this study, we assess the bridging potential and effectiveness of SCS shut-in procedures in offshore wells through forward coupling between the reservoir depletion occurring during post-blowout discharge and near-wellbore geomechanics. Physics-based forward-modeling, performed using semianalytical/numerical means, considering Mohr-Coulomb and tensile-failure criteria and integrating pressure models along the wellbore and the near-well (surrounding reservoir) vicinity, was used to predict the well’s behavior for a hypothetical offshore-deepwater scenario. The results build a dynamic framework for constructing data-driven empirical models that make it easy for well-control engineers to use. The presented workflows can help with pre-spud blowout-contingency planning vis-à-vis selecting an appropriate “active” killing procedure, enabling the calculation of post-blowout-flow rate thresholds that can be compared against the law-mandated, pre-spud worst-case-discharge (WCD) estimates to assess the possibilities of bridging (during the kick-to-blowout evolution), or underground-blowout occurrence (following the SCS shut-in).
Zitieren
APA
Khouissat, A., & Michael, A. (2026). Assessing “Passive” and “Active” Killing Approaches for Offshore-Well Blowouts by Integrating Reservoir Depletion with Near-Wellbore Geomechanics. SPE Journal, 31(11), 7421-7439. https://doi.org/10.2118/236620-pa
Vancouver
Khouissat A, Michael A. Assessing “Passive” and “Active” Killing Approaches for Offshore-Well Blowouts by Integrating Reservoir Depletion with Near-Wellbore Geomechanics. SPE Journal. 2026;31(11):7421-7439. doi:10.2118/236620-pa
BibTeX
@article{Khouissat2026,
author = {Khouissat, Abdelhakim and Michael, Andreas},
title = {Assessing “Passive” and “Active” Killing Approaches for Offshore-Well Blowouts by Integrating Reservoir Depletion with Near-Wellbore Geomechanics},
journal = {SPE Journal},
year = {2026},
volume = {31},
number = {11},
pages = {7421--7439},
doi = {10.2118/236620-pa}
}
EUVIMED