EUVIMEDEUVIMED entdecken
Crossref

Improving the Accuracy of Rock Failure Parameters Determined from Multi-Stage Triaxial Test

Guodong Jin, Héctor J. González-Pérez, Naif J. Alqahtani, Hyung T. Kwak

SPE Journal · 11.11.2026 · 31 (11) · 7647-7658

DOI: 10.2118/236616-pa ↗

Kurz gefasst

Fachartikel in der Zeitschrift SPE Journal, online erschienen am 31.08.2026. Verfasst von Guodong Jin und 3 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rock failure parameters [uniaxial compressive strength (UCS), cohesion, and friction angle], often determined from single-stage triaxial (SST) or multi-stage triaxial (MST) tests, are key input parameters for petroleum engineering applications. Their accuracy is limited by the methods used for measurement and interpretation. In this paper, we introduce a new approach of applying the least-squares polynomial regression (LSPR) technique for improving the accuracy of failure parameter determination from the MST test. The method uses the real-time data already acquired to build an LSPR model, the parameters of which are derived by minimizing the root mean squared error (RMSE) between the measurements and predictions. The optimized model is then applied to forecast the unacquired stress/strain curve (after the unloading point) and peak stress in the early stages of an MST test. The proposed method was validated using a series of SST and MST test data from Berea sandstone, tight sand, and carbonate reservoir rocks. For SST data, the relative difference between the predicted and measured peak stress is generally less than 4%. The peak stress predicted from MST data is commonly within 4% of the corresponding SST measurements. Failure parameters derived from LSPR predictions on MST data closely matched the SST test results. Compared with previous approaches, the LSPR method improved the accuracy of failure parameters from MST data by four to seven times, demonstrating its validity and effectiveness in enhancing the MST test results. For better prediction performance, the LSPR method requires MST tests to reach or exceed the yield point in each stage. An optimized LSPR model enables one to revisit the historical testing data (without the need for performing new tests) to obtain more accurate failure parameters of a rock sample from an MST test.

Zitieren

APA

Jin, G., González-Pérez, H. J., Alqahtani, N. J., & Kwak, H. T. (2026). Improving the Accuracy of Rock Failure Parameters Determined from Multi-Stage Triaxial Test. SPE Journal, 31(11), 7647-7658. https://doi.org/10.2118/236616-pa

Vancouver

Jin G, González-Pérez HJ, Alqahtani NJ, Kwak HT. Improving the Accuracy of Rock Failure Parameters Determined from Multi-Stage Triaxial Test. SPE Journal. 2026;31(11):7647-7658. doi:10.2118/236616-pa

BibTeX
@article{Jin2026,
  author = {Jin, Guodong and González-Pérez, Héctor J. and Alqahtani, Naif J. and Kwak, Hyung T.},
  title = {Improving the Accuracy of Rock Failure Parameters Determined from Multi-Stage Triaxial Test},
  journal = {SPE Journal},
  year = {2026},
  volume = {31},
  number = {11},
  pages = {7647--7658},
  doi = {10.2118/236616-pa}
}
Kostenlos starten →