EUVIMEDEUVIMED entdecken
Crossref

Self-Assembling Low-Viscosity-Increment Zwitterionic Polymer for Rheological Control in High-Temperature and High-Salinity Water-Based Drilling Fluids

Zhenhang Yuan, Xianbin Huang, Zhongyi Wang, Jinsheng Sun, Kaihe Lv, Taifeng Zhang, Junhao Shao, Peimin Quan

SPE Journal · 11.11.2026 · 31 (11) · 7379-7398

DOI: 10.2118/236613-pa ↗

Kurz gefasst

Fachartikel in der Zeitschrift SPE Journal, online erschienen am 03.09.2026. Verfasst von Zhenhang Yuan und 7 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Under harsh high-temperature and high-salinity (HTHS) conditions, water-based drilling fluids (WBDFs) face a critical technical bottleneck in rheological control: the difficulty in simultaneously achieving yield point (YP) and gel strength enhancement without excessive viscosity increase while preventing the deterioration of rheological structures under severe thermal and saline stresses. In this work, a self-assembling low-viscosity-increment rheology modifier (SARM) based on a zwitterionic copolymer was synthesized via inverse emulsion polymerization, with a small amount of Zr4+ introduced as an auxiliary coordination reinforcement component. Its molecular structure and thermal stability were systematically characterized, and its rheological regulation behavior and mechanism in HTHS environments were investigated in detail. SARM retained rheological regulation capability after hot rolling at 180°C under 7 wt% KCl and saturated 36 wt% NaCl conditions. In high-density WBDFs, SARM regulated rheological behavior with a relatively low viscosity increment and achieved enhanced YP values and favorable YP/plastic viscosity (PV) characteristics compared with representative commercial rheology modifiers. Mechanistic analysis indicates that SARM promotes the formation of a shear-responsive 3D self-assembled network in drilling fluids through the synergistic effects of thermally stable and conformationally constrained polymer chains and salt-responsive zwitterionic structures, with Zr4+ coordination interactions providing additional network reinforcement. This design helps alleviate the common trade-off between enhancing YP and gel strength, and increasing viscosity in conventional rheology modifiers while improving the dispersion state of bentonite particles and the compactness of filter cakes. This work provides a potential material strategy for precise rheological regulation of WBDFs under HTHS conditions, particularly for drilling in long horizontal sections.

Zitieren

APA

Yuan, Z., Huang, X., Wang, Z., Sun, J., Lv, K., Zhang, T., Shao, J., & Quan, P. (2026). Self-Assembling Low-Viscosity-Increment Zwitterionic Polymer for Rheological Control in High-Temperature and High-Salinity Water-Based Drilling Fluids. SPE Journal, 31(11), 7379-7398. https://doi.org/10.2118/236613-pa

Vancouver

Yuan Z, Huang X, Wang Z, Sun J, Lv K, Zhang T, et al. Self-Assembling Low-Viscosity-Increment Zwitterionic Polymer for Rheological Control in High-Temperature and High-Salinity Water-Based Drilling Fluids. SPE Journal. 2026;31(11):7379-7398. doi:10.2118/236613-pa

BibTeX
@article{Yuan2026,
  author = {Yuan, Zhenhang and Huang, Xianbin and Wang, Zhongyi and Sun, Jinsheng and Lv, Kaihe and Zhang, Taifeng and Shao, Junhao and Quan, Peimin},
  title = {Self-Assembling Low-Viscosity-Increment Zwitterionic Polymer for Rheological Control in High-Temperature and High-Salinity Water-Based Drilling Fluids},
  journal = {SPE Journal},
  year = {2026},
  volume = {31},
  number = {11},
  pages = {7379--7398},
  doi = {10.2118/236613-pa}
}
Kostenlos starten →