EUVIMEDEUVIMED entdecken
Crossref

A pH-Responsive Anionic Polyether Copolymer for Improving the Rheological and Filtration Properties of Drilling Fluid in CO2-Contaminated Environments

Xuefei Deng, Kaihe Lv, Jian Li, Jinsheng Sun, Ning Huang, Yao Chen

SPE Journal · 13.05.2026 · 31 (05) · 3019-3037

DOI: 10.2118/232812-pa ↗

Kurz gefasst

Fachartikel in der Zeitschrift SPE Journal, online erschienen am 10.03.2026. Verfasst von Xuefei Deng und 5 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the complex geological environment of deep formations, drilling operations are often confronted with carbon dioxide (CO2) contamination, which results in a reduction in the pH of drilling fluids, as well as an increase in their viscosity and filtration loss. However, existing treatment agents mainly function within a pH range of 8–11, and both excessive alkalinity and acidity can lead to their failure. Therefore, to address this challenge, we synthesized an anionic polyether copolymer (JN-1) using acrylic acid (AA), N-vinylpyrrolidone (NVP), sodium methaallyl sulfonate (SMAS), and isopentenyl polyoxyethylene ether (TPEG) as raw materials. The polymer JN-1 exhibited excellent viscosity-reducing performance under the conditions of CO2 saturation, sodium salt, calcium salt, and low pH value. At a concentration of 1 wt%, JN-1 reduced the apparent viscosity (AV), plastic viscosity (PV), and API filtration loss (FLAPI) of the CO2-contaminated base slurry containing 20% sodium chloride (NaCl) from 8.5 mPa·s, 7 mPa·s, and 150 mL to 6 mPa·s, 4 mPa·s, and 110 mL, respectively. It also maintained the AV, PV, and yield point (YP) of the CO2-contaminated base slurry containing 2% calcium chloride (CaCl2) within a certain range, preventing them from decreasing continuously. Moreover, the performance of JN-1 in drilling fluids aged at 180°C was superior to that of commonly used thinners (XY-27, HW-Thin, and SDZ-II). At the same time, JN-1 increased the absolute value of the zeta-potential for the base slurry from 8.2 mV to 23.8 mV and reduced its particle size from 19.1 μm to 13.69 μm. This was mainly because JN-1 could provide a stable protonation-resistant negative charge (-SO3−), which enabled the electric double layer on the bentonite surface to maintain its original thickness even in a low-pH environment. In summary, the development of JN-1 can provide a novel strategy for the design of drilling fluid materials applicable to complex deep formations.

Zitieren

APA

Deng, X., Lv, K., Li, J., Sun, J., Huang, N., & Chen, Y. (2026). A pH-Responsive Anionic Polyether Copolymer for Improving the Rheological and Filtration Properties of Drilling Fluid in CO2-Contaminated Environments. SPE Journal, 31(05), 3019-3037. https://doi.org/10.2118/232812-pa

Vancouver

Deng X, Lv K, Li J, Sun J, Huang N, Chen Y. A pH-Responsive Anionic Polyether Copolymer for Improving the Rheological and Filtration Properties of Drilling Fluid in CO2-Contaminated Environments. SPE Journal. 2026;31(05):3019-3037. doi:10.2118/232812-pa

BibTeX
@article{Deng2026,
  author = {Deng, Xuefei and Lv, Kaihe and Li, Jian and Sun, Jinsheng and Huang, Ning and Chen, Yao},
  title = {A pH-Responsive Anionic Polyether Copolymer for Improving the Rheological and Filtration Properties of Drilling Fluid in CO2-Contaminated Environments},
  journal = {SPE Journal},
  year = {2026},
  volume = {31},
  number = {05},
  pages = {3019--3037},
  doi = {10.2118/232812-pa}
}
Kostenlos starten →