EUVIMEDEUVIMED entdecken
Crossref

Determining Operating Envelope of an Ultrahigh-Speed Electric Submersible Pump Using Maximum Flow Relationships

C. E. Ejim, H. M. Banjar, Y. Alexeev

SPE Journal · 01.11.2026 · 1-12

DOI: 10.2118/232696-pa ↗

Kurz gefasst

Fachartikel in der Zeitschrift SPE Journal, online erschienen am 20.11.2026. Verfasst von C. E. Ejim und 2 weiteren Autor:innen. Die Arbeit nennt 13 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-speed and ultrahigh-speed (UHS) electric submersible pumps (ESP) operate at rotational speeds greater than 4,200 revolutions per minute (rev/min), compared with 3,000 rev/min or 3,500 rev/min for conventional pumps. These pumps are becoming integral parts of artificial-lift systems to boost production, especially from slim casings/liners. The current study presents and discusses the performance characteristics of an UHS labyrinth screw pump (LSP). The work sheds light to further understand the pump capabilities for oilfield artificial-lift applications. A 4-in. housing outer-diameter UHS LSP was tested at 3,500 rev/min, 6,000 rev/min, 8,000 rev/min, and 10,000 rev/min. Water was the test fluid with volume flow rates from shut-in to 1,953 barrels per day (B/D). The corresponding boost pressures and brake horsepower (BHP) for each data were obtained. The maximum flow rates, boost pressures, and BHP were determined for the 3,500 rev/min, 6,000 rev/min, and 10,000 rev/min pump operating speeds and used to develop combined dimensionless performance curves. The curves were used to estimate the performance envelope at 8,000 rev/min, and the results subsequently compared with the actual test data. The measured pump boost pressures varied from 34 psi to 435 psi, and BHP range was 0.5–33.5 HP. The pump boost pressures as well as BHPs both decreased linearly with increasing liquid volume flow rate, with maximum liquid volume flow rates between 1,300 B/D and 3,480 B/D. From the dimensionless plots obtained using the maximum liquid flow rates, maximum boost pressures, and maximum BHPs, the respective data for the 3,500-rev/min, 6,000-rev/min, and 10,000-rev/min tests collapsed on one another. The functional curves for boost pressure and BHP were obtained with coefficient of determination (R2) values of 0.9761 and 0.9800, respectively. Using the maximum values, relationships were obtained for each of the maximum values as a function of pump rotational speed. The estimated boost pressures at a pump speed of 8,000 rev/min varied between −6% and +10% of the measured boost pressure test data at the same volume flow rates. The R2 value was 0.9896 with a root mean square error (RMSE) of 12.8 psi. The estimated BHPs varied between −16% and +5% of the measured BHP test data at the same volume flow rates. The R2 value and RMSE were 0.9800 and 1.2 HP, respectively. Understanding the performance characteristics of new types of pumping systems is important to establish their operating capabilities for oilfield artificial-lift production applications. This study highlights a dimensionless technique that may be used to determine maximum operating parameters at different pump speeds using information from a known operating speed. Such tools are beneficial for artificial-lift engineers, production engineers, or other stakeholders to ascertain maximum capabilities of a pumping system within their field asset.

Zitieren

APA

Ejim, C. E., Banjar, H. M., & Alexeev, Y. (2026). Determining Operating Envelope of an Ultrahigh-Speed Electric Submersible Pump Using Maximum Flow Relationships. SPE Journal, 1-12. https://doi.org/10.2118/232696-pa

Vancouver

Ejim CE, Banjar HM, Alexeev Y. Determining Operating Envelope of an Ultrahigh-Speed Electric Submersible Pump Using Maximum Flow Relationships. SPE Journal. 2026:1-12. doi:10.2118/232696-pa

BibTeX
@article{Ejim2026,
  author = {Ejim, C. E. and Banjar, H. M. and Alexeev, Y.},
  title = {Determining Operating Envelope of an Ultrahigh-Speed Electric Submersible Pump Using Maximum Flow Relationships},
  journal = {SPE Journal},
  year = {2026},
  pages = {1--12},
  doi = {10.2118/232696-pa}
}
Kostenlos starten →