Addressing Annular Pressure Challenges in Subsea Wells: Strategy for Well Integrity
SPE Journal · 01.11.2026 · 1-13
DOI: 10.2118/230724-pa ↗Kurz gefasst
Fachartikel in der Zeitschrift SPE Journal, online erschienen am 20.11.2026. Verfasst von R. Trevisan und 5 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben.
Abstract (Originalsprache)
In subsea wells where access to the casing annuli is not possible, annular pressure buildup (APB) caused by the thermal effects of hydrocarbon production presents a well-known challenge. This issue can lead to problems with the integrity of outer casing strings and compromise well barriers. Addressing APB typically involves a range of design solutions and practical strategies to mitigate risks that threaten the integrity of the production casing, production tubing, and completion elements. Where possible, this problem is addressed during the design phase by specifying that the outer casing strings’ cement top be placed adequately below the prior casing shoe, providing an “open shoe” that relies on the formation strength to relieve the building pressure into the formation. However, for wells that have already been completed and placed on production without adequate mitigation or where the cement top must be positioned above the previous shoe to meet well construction requirements, including the isolation of a permeable zone, as well as late-life requirements, such as managing abandonment operations, the problem persists. Current mitigation strategies, including pressure relief devices, gas pads, syntactic foam, and others to minimize the issues with APB, cannot be applied to existing wells. For new wells, these approaches are not entirely risk-free and may require specialized manufacturers’ assistance during the design and execution phases. In such cases, determining the A-annulus envelope (AAE) is important. The AAE defines the pressure range within which the integrity of the production casing, tubing, completion elements, and preferably the outer casing strings, such as the intermediate casing, is maintained. Whenever this envelope is limited in terms of operating pressure range, the operability of the annulus may be impractical or difficult to maintain. It is then crucial to establish potential failure scenarios to ensure the integrity of primary and secondary well barrier elements when the outer strings, which are nonbarrier elements, have failed or are at high risk of failure. This work explores the specific challenge of subsea wells with sealed outer annuli, focusing on pressure management in the A-annulus to control APB development in the outer annuli while maintaining well integrity, without relying on specific APB mitigation strategies. The paper presents a method for determining the AAE for potential failure of one or more outer casings while maintaining the overall integrity and operability of the well. The method is applicable to both new wells, ensuring proper design, and existing wells, where it allows for comparison of the envelope with A-annulus pressure history records to assess the current integrity status and determine the operational envelope moving forward. Unlike previous work on annulus operating envelopes (e.g., Kalil et al. 2025), which is limited to the A-annulus and its barrier elements, the proposed AAE also evaluates the inaccessible outer casing strings. This enables assessment of the overall well integrity, inference of the most likely outer-casing integrity scenario, and evaluation of whether continued operation remains feasible while maintaining the integrity of the primary barrier system.
Zitieren
APA
Trevisan, R., Vincendet, M., Oyovwevotu, J., Pozo, M., Kalil, I. A., & Glover, S. B. (2026). Addressing Annular Pressure Challenges in Subsea Wells: Strategy for Well Integrity. SPE Journal, 1-13. https://doi.org/10.2118/230724-pa
Vancouver
Trevisan R, Vincendet M, Oyovwevotu J, Pozo M, Kalil IA, Glover SB. Addressing Annular Pressure Challenges in Subsea Wells: Strategy for Well Integrity. SPE Journal. 2026:1-13. doi:10.2118/230724-pa
BibTeX
@article{Trevisan2026,
author = {Trevisan, R. and Vincendet, M. and Oyovwevotu, J. and Pozo, M. and Kalil, I. A. and Glover, S. B.},
title = {Addressing Annular Pressure Challenges in Subsea Wells: Strategy for Well Integrity},
journal = {SPE Journal},
year = {2026},
pages = {1--13},
doi = {10.2118/230724-pa}
}
EUVIMED