Phase Behavior and Physical Properties of Dimethyl Ether/CO2/Water/Heavy Oil Systems under Reservoir Conditions
SPE Journal · 08.02.2023 · 28 (01) · 301-318
DOI: 10.2118/206171-pa ↗Kurz gefasst
Fachartikel in der Zeitschrift SPE Journal, online erschienen am 08.07.2022. Verfasst von Desheng Huang und 2 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 40 Literaturangaben.
Abstract (Originalsprache)
In this paper, techniques have been developed to quantify phase behavior and physical properties including phase boundaries, swelling factors (SFs), and phase volumes for reservoir fluids containing polar components from both experimental and theoretical aspects. Experimentally, a total of seven pressure-volume-temperature (PVT) experiments, including one set of dimethyl ether (DME)/heavy oil system, one set of DME/water/heavy oil system, three sets of DME/CO2/heavy oil systems, and two sets of DME/CO2/water/heavy oil systems, have been carried out to measure saturation pressures, phase volumes, and SFs by using a versatile PVT setup. Theoretically, the modified Peng-Robinson equation of state (PR EOS) incorporated with the Huron-Vidal (HV) mixing rule and the Péneloux volume-translation strategy is used as the thermodynamic model to perform phase equilibrium calculations. Once validated with the measured phase compositions of DME/water mixtures collected from the literature, the theoretical model developed in this work is used to reproduce the experimental measurements for the aforementioned reservoir fluids. It is observed that the saturation pressures of DME/CO2/water/heavy oil mixtures are higher than those of DME/CO2/heavy oil mixtures at the same temperature and same molar ratio of solvents and heavy oil, owing to the fact that more water molecules can be evaporated into the vapor phase. The binary interaction parameters (BIPs) between DME/heavy oil and CO2/DME pair, which are obtained by matching the measured saturation pressures of DME/CO2/heavy oil mixtures, work well for DME/CO2/heavy oil mixtures in the absence and presence of water. In addition, the swelling effect of heavy oil can be enhanced by adding the DME and CO2 mixtures compared with only DME or CO2. The new model developed in this work is capable of accurately reproducing the experimentally measured multiphase boundaries, SFs, and phase volumes with root-mean-squared relative errors (RMSREs) of 4.68, 0.71, and 9.35%, respectively, indicating that it can accurately provide fundamental data for simulating, designing, and optimizing the hybrid steam-solvent recovery processes for heavy oil reservoirs.
Zitieren
APA
Huang, D., Li, Y., & Yang, D. (2023). Phase Behavior and Physical Properties of Dimethyl Ether/CO2/Water/Heavy Oil Systems under Reservoir Conditions. SPE Journal, 28(01), 301-318. https://doi.org/10.2118/206171-pa
Vancouver
Huang D, Li Y, Yang D. Phase Behavior and Physical Properties of Dimethyl Ether/CO2/Water/Heavy Oil Systems under Reservoir Conditions. SPE Journal. 2023;28(01):301-318. doi:10.2118/206171-pa
BibTeX
@article{Huang2023,
author = {Huang, Desheng and Li, Yunlong and Yang, Daoyong},
title = {Phase Behavior and Physical Properties of Dimethyl Ether/CO2/Water/Heavy Oil Systems under Reservoir Conditions},
journal = {SPE Journal},
year = {2023},
volume = {28},
number = {01},
pages = {301--318},
doi = {10.2118/206171-pa}
}
EUVIMED