Physical and Mechanical Characterization of NK 7328 Sumo Corncob Blocks for Sustainable Furniture Applications
Agroindustrial Technology Journal · 19.11.2026 · 10 (2) · 1-17
DOI: 10.21111/atj.v10i2.31 ↗Kurz gefasst
Fachartikel in der Zeitschrift Agroindustrial Technology Journal, online erschienen am 19.11.2026. Verfasst von Nurvirzy Muflih Atallah und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
NK 7328 Sumo corncob block is abundant agricultural residue with potential as a renewable lignoselulosic biomaterial for sustainable furniture applications. However comprehensive physical and mechanical chracterization of corncob block has not been investigated yet. This study aimed to characterize the physical and mechanical properties of NK 7328 Sumo corncob blocks, including dimensions, mass, density, and moisture content. Mechanical testing via compression test (parallel and perpendicular to the structure) and three-point bending test was conducted using a Universal Testing Machine and supporting manual compression test. The results indicated that corncob blocks possess low density, moderate moisture content, and relatively uniform dimensions, reflecting their lightweight lignoselulosic nature. Mechanical testing revealed anistropic behavior, with average compressive stresses of 7.41 ± 1.52 MPa (parallel) and 17.04 ± 4.48 Mpa (perpendicular). The coresponding compressive modulus of elasticity was 225.31 ± 33.32 MPa (parallel) and 104.57 ± 19.14 MPa (perpendicular), respectively. The average flexural stress was 6.75 ± 0.42 MPa with a flexural modulus of elasticity of 365.87 ± 88.17 MPa. These properties were includid by NK 7328 Sumo corncob block’s porosity, anisotropy, and internal heterogeneity. This findings sugest that NK 7328 Sumo corncob are suitable for lightweight, non-structural, semi-functional, and decorative furniture components, although their mechanical strength and stiffness limit their use in primary load-bearing applications.
Zitieren
APA
Atallah, N. M., Nurlilasari, P., Masri, A., & Hanifah, A. (2026). Physical and Mechanical Characterization of NK 7328 Sumo Corncob Blocks for Sustainable Furniture Applications. Agroindustrial Technology Journal, 10(2), 1-17. https://doi.org/10.21111/atj.v10i2.31
Vancouver
Atallah NM, Nurlilasari P, Masri A, Hanifah A. Physical and Mechanical Characterization of NK 7328 Sumo Corncob Blocks for Sustainable Furniture Applications. Agroindustrial Technology Journal. 2026;10(2):1-17. doi:10.21111/atj.v10i2.31
BibTeX
@article{Atallah2026,
author = {Atallah, Nurvirzy Muflih and Nurlilasari, Puspita and Masri, Andry and Hanifah, Aisyah},
title = {Physical and Mechanical Characterization of NK 7328 Sumo Corncob Blocks for Sustainable Furniture Applications},
journal = {Agroindustrial Technology Journal},
year = {2026},
volume = {10},
number = {2},
pages = {1--17},
doi = {10.21111/atj.v10i2.31}
}
EUVIMED