Genetic Algorithm-Based SVC Capacity Optimization for Voltage Stability in 500 kV Systems
JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA) · 30.04.2026 · 10 (1) · 1-13
DOI: 10.21070/jeeeu.v10i1.1737 ↗Kurz gefasst
Fachartikel in der Zeitschrift JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA), online erschienen am 30.04.2026. Verfasst von Istiyo Winarno und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
General Background: Voltage stability and reactive power management remain critical operational challenges in large-scale 500 kV transmission systems operating under high loading conditions. Specific Background: Static Var Compensators (SVCs) are widely applied to support voltage regulation; however, determining appropriate SVC capacity remains complex because inadequate sizing may reduce system performance and increase transmission losses. Knowledge Gap: Previous studies have frequently emphasized voltage improvement in simplified benchmark systems without comprehensively integrating realistic power flow simulation and transmission loss evaluation in large-scale networks.
Aims
This study aims to determine the optimal SVC capacity using a Genetic Algorithm (GA) to improve voltage stability and reduce transmission losses in a 500 kV transmission system.
Results
A quantitative simulation-based framework integrating ETAP load flow analysis and MATLAB-based GA optimization was implemented under steady-state operating conditions. The base-case scenario recorded a minimum voltage of 455.009 kV and total transmission losses of 607.32 MW. After applying optimized SVC capacities of 404.80 MVAr, 288.43 MVAr, and 175.94 MVAr at critical buses, voltage magnitudes increased by 0.98%–7.89%, while transmission losses decreased to 594.30 MW, representing a 13.02 MW reduction or 2.14% improvement. The convergence analysis confirmed stable optimization behavior within 100 generations. Novelty: The study introduces an integrated simulation–optimization framework combining ETAP and GA for practical SVC capacity determination in a realistic 500 kV transmission network.
Implications
The findings provide a reproducible and practical reference for reactive power planning, voltage stability improvement, and transmission efficiency optimization in large-scale power systems.
Zitieren
APA
Winarno, I., K, I. D. P., & Dewantara, B. Y. (2026). Genetic Algorithm-Based SVC Capacity Optimization for Voltage Stability in 500 kV Systems. JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA), 10(1), 1-13. https://doi.org/10.21070/jeeeu.v10i1.1737
Vancouver
Winarno I, K IDP, Dewantara BY. Genetic Algorithm-Based SVC Capacity Optimization for Voltage Stability in 500 kV Systems. JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA). 2026;10(1):1-13. doi:10.21070/jeeeu.v10i1.1737
BibTeX
@article{Winarno2026,
author = {Winarno, Istiyo and K, Iradiratu Diah P and Dewantara, Belly Yan},
title = {Genetic Algorithm-Based SVC Capacity Optimization for Voltage Stability in 500 kV Systems},
journal = {JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA)},
year = {2026},
volume = {10},
number = {1},
pages = {1--13},
doi = {10.21070/jeeeu.v10i1.1737}
}
EUVIMED