EUVIMEDEUVIMED entdecken
Crossref

Computational study of Fe 3 O 4 nanofluid and geometry effects in double-pipe heat exchangers

S.M. Ashraf Jahangir Ahmed, Wali Sohail, Adil Loya

Academia Nano: Science, Materials, Technology · 17.11.2026 · 3 (4)

DOI: 10.20935/acadnano8638 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Academia Nano: Science, Materials, Technology, online erschienen am 17.11.2026. Verfasst von S.M. Ashraf Jahangir Ahmed und 2 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Introduction

The performance of Fe 3 O 4 nanofluid in concentric pipe heat exchangers was evaluated against pure water and ethylene glycol as baselines to determine thermal–hydraulic feasibility. Materials and methods: This was achieved by computationally modelling heat transfer across straight, 90° T-shaped and 45° Y-shaped double-pipe geometries and two single-bend controls (a 90° elbow and a 45° bend), with water or ethylene glycol in the inner tube.

Results

The nanofluid raised the annulus-side convective heat transfer coefficient by a factor of 1.114–1.126 in every geometry and leg ( h ∝ k 0.53 for a 23% rise in conductivity), with no change in friction factor or pressure drop. Because the annular film carries 38–52% of the thermal resistance with water in the inner tube and about 7% with ethylene glycol, the overall coefficient rose by 4.2–6.0% and 0.7–1.4%, respectively. Junctions and bends raised the local wall heat flux by 10–31% within about 0.2 m of the junction but contributed at most 2% of the heat duty; downstream legs recovered the straight-pipe coefficient within 1.3%, and the junctions added loss coefficients of 0.2–1.4.

Conclusions

An ultra-dilute Fe 3 O 4 suspension gives a modest, penalty-free gain that scales with the share of thermal resistance on the side where it is used, whereas junctions and bends act only locally and at a pressure cost; the two effects are independent and additive.

Zitieren

APA

Ahmed, S. A. J., Sohail, W., & Loya, A. (2026). Computational study of Fe 3 O 4 nanofluid and geometry effects in double-pipe heat exchangers. Academia Nano: Science, Materials, Technology, 3(4). https://doi.org/10.20935/acadnano8638

Vancouver

Ahmed SAJ, Sohail W, Loya A. Computational study of Fe 3 O 4 nanofluid and geometry effects in double-pipe heat exchangers. Academia Nano: Science, Materials, Technology. 2026;3(4). doi:10.20935/acadnano8638

BibTeX
@article{Ahmed2026,
  author = {Ahmed, S.M. Ashraf Jahangir and Sohail, Wali and Loya, Adil},
  title = {Computational study of Fe 3 O 4 nanofluid and geometry effects in double-pipe heat exchangers},
  journal = {Academia Nano: Science, Materials, Technology},
  year = {2026},
  volume = {3},
  number = {4},
  doi = {10.20935/acadnano8638}
}
Kostenlos starten →