EUVIMEDEUVIMED entdecken
Crossref

Toward structure-specific modeling of cotton/Lycra knit width, density and recovery

Faridul Islam Ovi, Lutfunnahar Khuki, Md Bayezid Hasan

Academia Materials Science · 16.11.2026 · 3 (4)

DOI: 10.20935/acadmatsci8614 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Academia Materials Science, online erschienen am 16.11.2026. Verfasst von Faridul Islam Ovi und 2 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Introduction

Cotton/Lycra ® weft-knitted fabrics are the dominant substrate for stretch apparel, yet manufacturers still lack structure-specific, quantitative rules for predicting how yarn count and elastane denier will shift dimensional stability once fabric leaves the knitting floor. This study establishes such rules across the following three fundamental weft-knitted architectures used in stretch knitwear: single jersey, 1 × 1 rib, and interlock. Materials and methods: Using a near-complete factorial design, 24 fabric variants were produced by systematically varying cotton yarn count (26/1–44/1 Ne) and Lycra ® denier (20D–70D) under controlled industrial dyeing (reactive, pH 10.5–11.0, and 95 °C) and finishing conditions. Characterisation followed EN 12127:1998, EN 14970:2006, ISO 22198:2006, and EN 14704-1:2005 standards. Specimen-level replicate dispersion was summarised descriptively (coefficient of variation); confirmatory inferential comparisons were made at the level of the 24 independent fabric variants by one-way ANOVA with Tukey HSD, alongside Pearson correlation and multiple linear regression (IBM SPSS v.29).

Results

Structure-specific critical yarn counts, at which finished width approximates machine diameter, were identified at 34/1 Ne for single jersey and 30/1 Ne for 1 × 1 rib, and extrapolated at approximately 32/1 Ne for interlock. Each 2-Ne deviation from these reference counts produced mean marginal finish-width changes of approximately 1.9 inches (single jersey), 0.45 inches (1 × 1 rib), and 0.4 inches (interlock), captured by structure-specific regression models (R 2 = 0.84–0.94). The areal-density gain (ADG, also known as the “colour absorption index”; a grey-to-finished mass-gain metric reflecting densification and finishing-chemical retention, not dye uptake) ranged from 6.1% to 20.9% and correlated positively with Lycra ® denier across the pooled dataset (r = 0.69, p < 0.001; within-structure r = 0.58–0.81), while elastic recovery spanned 92.5–98.5%, with course-wise extension following the hierarchy interlock (146%) ≈ rib (143%) ≫ single jersey (101%).

Conclusions

The resulting structure-specific regression models constitute a multi-structure, industrial-scale framework linking finish width and areal density to yarn and elastane specifications. Cross-validated prediction error was higher than in-sample fit—substantially so for interlock, where only six design points were available—so these models are best used as a quantitative starting point for fabric design, to be confirmed and refined with further production data, rather than as a substitute for pilot-scale verification.

Zitieren

APA

Ovi, F. I., Khuki, L., & Hasan, M. B. (2026). Toward structure-specific modeling of cotton/Lycra knit width, density and recovery. Academia Materials Science, 3(4). https://doi.org/10.20935/acadmatsci8614

Vancouver

Ovi FI, Khuki L, Hasan MB. Toward structure-specific modeling of cotton/Lycra knit width, density and recovery. Academia Materials Science. 2026;3(4). doi:10.20935/acadmatsci8614

BibTeX
@article{Ovi2026,
  author = {Ovi, Faridul Islam and Khuki, Lutfunnahar and Hasan, Md Bayezid},
  title = {Toward structure-specific modeling of cotton/Lycra knit width, density and recovery},
  journal = {Academia Materials Science},
  year = {2026},
  volume = {3},
  number = {4},
  doi = {10.20935/acadmatsci8614}
}
Kostenlos starten →