EUVIMEDEUVIMED entdecken
Crossref

Magnesium chloride saltwater solutions as phase change material for sub-zero thermal energy storage

Thandiwe Bongani Radebe, Lucas Sekele, Asasei Unarine Casey Ndanduleni, Lehlogonolo Rudolf Kanyane, Zhongjie Huan, Washington Mhike, Innocentia Boingontlo Setlhabi, James Molelekoa Mosesane

Academia Green Energy · 09.07.2026 · 3 (3)

DOI: 10.20935/acadenergy8409 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Academia Green Energy, online erschienen am 09.07.2026. Verfasst von Thandiwe Bongani Radebe und 7 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Introduction

Efficient sub-zero latent heat thermal energy storage (LHTES) is critical for decarbonizing refrigerated transport. While aqueous magnesium chloride (MgCl2) is a highly promising inorganic phase change material (PCM), its industrial deployment is severely limited by phase transition anomalies, severe supercooling, and aggressive corrosivity. Materials and methods: This study investigates the thermodynamic and electrochemical behaviour of MgCl2 solutions (14–25 wt.%) to resolve existing literature discrepancies regarding hypereutectic phase boundaries and to establish optimal containment parameters.

Results

Differential scanning calorimetry (DSC) and bulk-scale cooling protocols revealed that rapid thermal gradients kinetically suppress primary hydrate precipitation in 25 wt.% solutions, inducing a metastable state that solidifies en masse near −34 °C rather than the predicted equilibrium liquidus. Furthermore, macro-scale evaluations (500 g) demonstrated significant thermal lag compared to micro-scale baselines, driven by the low intrinsic thermal conductivity of the crystalline matrix. To resolve the containment bottleneck, potentiodynamic polarisation and 480 h ASTM G31 immersion tests evaluated aluminium, copper, and 316L stainless steel. Aluminium exhibited rapid passive layer breakdown and severe chloride-induced pitting, evidenced by Al(OH)3 precipitation. Conversely, 316L stainless steel demonstrated superior localised corrosion resistance and a stable passivation layer (icorr ≈ 1.5 µA cm−2).

Conclusions

Ultimately, a 21 wt.% eutectic MgCl2 solution paired with 316L stainless steel provides the optimum thermodynamic and structural configuration for next-generation sub-zero heat exchangers.

Zitieren

APA

Radebe, T. B., Sekele, L., Ndanduleni, A. U. C., Kanyane, L. R., Huan, Z., Mhike, W., Setlhabi, I. B., & Mosesane, J. M. (2026). Magnesium chloride saltwater solutions as phase change material for sub-zero thermal energy storage. Academia Green Energy, 3(3). https://doi.org/10.20935/acadenergy8409

Vancouver

Radebe TB, Sekele L, Ndanduleni AUC, Kanyane LR, Huan Z, Mhike W, et al. Magnesium chloride saltwater solutions as phase change material for sub-zero thermal energy storage. Academia Green Energy. 2026;3(3). doi:10.20935/acadenergy8409

BibTeX
@article{Radebe2026,
  author = {Radebe, Thandiwe Bongani and Sekele, Lucas and Ndanduleni, Asasei Unarine Casey and Kanyane, Lehlogonolo Rudolf and Huan, Zhongjie and Mhike, Washington and Setlhabi, Innocentia Boingontlo and Mosesane, James Molelekoa},
  title = {Magnesium chloride saltwater solutions as phase change material for sub-zero thermal energy storage},
  journal = {Academia Green Energy},
  year = {2026},
  volume = {3},
  number = {3},
  doi = {10.20935/acadenergy8409}
}
Kostenlos starten →