Thermally switchable gauge-factor bits for multilevel gain coding in reversible shape-memory strain sensor arrays
Soft Science · 15.10.2026 · 6 (4)
DOI: 10.20517/ss.2026.173 ↗Kurz gefasst
Fachartikel in der Zeitschrift Soft Science, online erschienen am 15.10.2026. Verfasst von Wenjie Qiao und 9 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben.
Abstract (Originalsprache)
Flexible strain sensors are typically constructed with a fixed gauge factor (GF), making it difficult for sensor arrays to accommodate weak, moderate, and strong mechanical inputs within a single system. Here, we report a thermally switchable GF-bit strain-sensing system based on a reversible shape-memory polymer/carbon black composite. Thermal stimulation reversibly changes the programmed polymer shape state and the strain-dependent response of the conductive network, whereas mechanical strain serves as the sensing readout input. A single sensing pixel switches between a heated low-GF state and a room-temperature high-GF state, with GF values of 3.3 and 72.1, respectively, corresponding to an approximately 22-fold difference. The two GF states remained distinguishable over 50 thermal switching cycles, and a representative single-sensor erase-and-reprogram test yielded low- and high-GF values close to their corresponding initial values. Temperature-dependent measurements identified a high-GF regime over the tested range of 5-45 °C, a pronounced transition toward the low-GF state over approximately 45-54 °C, and a low-GF plateau over the tested range of 54-70 °C. By integrating GF bits into series, parallel, and 3 × 3 electrical arrays, local binary states were converted into discrete array-level effective-GF outputs that were quantitatively described using a finite-strain circuit model based on exact series/parallel circuit relations. The resulting high-, intermediate-, and low-effective-GF states provide different output windows under the same nominal mechanical-input protocol. These results demonstrate that GF can be converted from a fixed post-fabrication parameter into a thermally switchable and electrically combinable gain state for programmable flexible sensor arrays.
Zitieren
APA
Qiao, W., Wang, Z., Dong, L., Cui, H., Wang, T., Zhu, X., Yang, C., Wang, Y., Zhang, X., & Kong, J. (2026). Thermally switchable gauge-factor bits for multilevel gain coding in reversible shape-memory strain sensor arrays. Soft Science, 6(4). https://doi.org/10.20517/ss.2026.173
Vancouver
Qiao W, Wang Z, Dong L, Cui H, Wang T, Zhu X, et al. Thermally switchable gauge-factor bits for multilevel gain coding in reversible shape-memory strain sensor arrays. Soft Science. 2026;6(4). doi:10.20517/ss.2026.173
BibTeX
@article{Qiao2026,
author = {Qiao, Wenjie and Wang, Zichao and Dong, Lehua and Cui, Hanyu and Wang, Ting and Zhu, Xuefeng and Yang, Chao and Wang, Yuehan and Zhang, Xuan and Kong, Jie},
title = {Thermally switchable gauge-factor bits for multilevel gain coding in reversible shape-memory strain sensor arrays},
journal = {Soft Science},
year = {2026},
volume = {6},
number = {4},
doi = {10.20517/ss.2026.173}
}
EUVIMED