Microstructural evolution and fatigue mechanism of 316LN austenitic stainless steel welded joint at 4.2 K
Microstructures · 13.05.2026 · 6 (3)
DOI: 10.20517/microstructures.2025.143 ↗Kurz gefasst
Fachartikel in der Zeitschrift Microstructures, online erschienen am 13.05.2026. Verfasst von Xiaole Gong und 10 weiteren Autor:innen. Die Arbeit nennt 62 Literaturangaben.
Abstract (Originalsprache)
The large-scale superconducting magnets used in the International Thermonuclear Experimental Reactor (ITER), demand structural materials that can endure long-term cyclic electromagnetic loading at 4.2 K. In this study, the microstructural evolution and plasticity mechanisms of a 316LN stainless steel welded joint subjected to fatigue at 4.2 K were systematically investigated for the first time. A combination of nanoindentation, electron backscatter diffraction, energy dispersive spectroscopy, electron channeling contrast imaging and transmission electron microscopy was employed for comprehensive characterization. The results reveal distinct fatigue mechanisms between the heat-affected zone (HAZ) and the fusion zone (FZ). The HAZ primarily accommodates deformation through wavy dislocation slip, while the FZ is dominated by planar slip. Notably, the FZ exhibits enhanced formation of stacking faults and nanotwins. These features are attributed to the elemental segregation in the interdendritic regions, which locally reduces the stacking fault energy and lowers the critical stress required for stacking fault formation via dislocation dissociation. Besides, a strong solidification-induced texture is formed in the FZ, which increases the local Schmid factor and thereby the resolved shear stress for promoting the nucleation of stacking faults and nanotwins. Additionally, Lomer-Cottrell locks are observed in the FZ as a result of dominant planar slip, contributing to dislocation multiplication. These findings offer important insights into the cryogenic fatigue behavior of austenitic stainless steel welds and contribute to the design of reliable structural components for fusion energy applications.
Zitieren
APA
Gong, X., Xin, J., Zhang, H., Zhao, H., Zhu, M., Huang, C., Shen, F., Lyu, B., Liang, Z., Wang, W., & Li, L. (2026). Microstructural evolution and fatigue mechanism of 316LN austenitic stainless steel welded joint at 4.2 K. Microstructures, 6(3). https://doi.org/10.20517/microstructures.2025.143
Vancouver
Gong X, Xin J, Zhang H, Zhao H, Zhu M, Huang C, et al. Microstructural evolution and fatigue mechanism of 316LN austenitic stainless steel welded joint at 4.2 K. Microstructures. 2026;6(3). doi:10.20517/microstructures.2025.143
BibTeX
@article{Gong2026,
author = {Gong, Xiaole and Xin, Jijun and Zhang, Hengcheng and Zhao, Hongyun and Zhu, Mingliang and Huang, Chuanjun and Shen, Fuzhi and Lyu, Bingkun and Liang, Zhiyuan and Wang, Wei and Li, Laifeng},
title = {Microstructural evolution and fatigue mechanism of 316LN austenitic stainless steel welded joint at 4.2 K},
journal = {Microstructures},
year = {2026},
volume = {6},
number = {3},
doi = {10.20517/microstructures.2025.143}
}
EUVIMED