EUVIMEDEUVIMED entdecken
Crossref

Fabrication of MOF-derived porous Au@Co-ZnO nanostructures with excellent C 2 H 5 OH sensing performance

Kaiwen Tian, Yukang Fu, Inzimamul Haq, Shuangyang Kuang, Gaojie Xiong, Zeyuan Zhao, Tianyu Zhou, Jun Weng, Xiang Peng, Liwei Xiong

Microstructures · 15.04.2025 · 5 (3)

DOI: 10.20517/microstructures.2024.110 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Microstructures, online erschienen am 15.04.2025. Verfasst von Kaiwen Tian und 9 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 49 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aim

Zinc oxide (ZnO) is an n-type semiconductor with a wide bandgap, excellent electron mobility, and stable chemical characteristics, making it potentially applicable in the field of gas sensing. However, conventional ZnO-based gas sensors face challenges such as high operating temperatures and low sensitivity.

Methods

In this paper, we first synthesized ZIF-8 with a rhombic dodecahedron structure using a room-temperature chemical precipitation method. By doping ZIF-8 with cobalt (Co) and exchanging gold ions, followed by calcination in air, we obtained a metal-organic framework (MOF) derived porous Au@Co-ZnO nanostructure.

Results

This nanostructure retained the large specific surface area and porous characteristics of ZIF-8, while its gas sensing performance was significantly enhanced compared to the pure MOF-derived ZnO nanostructure, due to Co doping and gold nanoparticle modification. At an ethanol concentration of 100 ppm, the Au@Co-ZnO sample demonstrated its best performance at 140 °C, with a response value of 205.3. This result was 28.9 times higher compared to the pure ZnO sample, which showed a response value of 7.1 under identical conditions. Additionally, the optimal operating temperature was 40 °C lower than that of the pure ZnO sample (180 °C). Furthermore, the Au@Co-ZnO samples demonstrated good stability and selectivity for ethanol gas.

Conclusion

The proposed MOF-derived porous Au@Co-ZnO nanostructures not only advance the application of MOF-derived materials in gas detection but also offer a novel approach for boosting the gas-sensing performance of other metal oxide materials.

Zitieren

APA

Tian, K., Fu, Y., Haq, I., Kuang, S., Xiong, G., Zhao, Z., Zhou, T., Weng, J., Peng, X., & Xiong, L. (2025). Fabrication of MOF-derived porous Au@Co-ZnO nanostructures with excellent C 2 H 5 OH sensing performance. Microstructures, 5(3). https://doi.org/10.20517/microstructures.2024.110

Vancouver

Tian K, Fu Y, Haq I, Kuang S, Xiong G, Zhao Z, et al. Fabrication of MOF-derived porous Au@Co-ZnO nanostructures with excellent C 2 H 5 OH sensing performance. Microstructures. 2025;5(3). doi:10.20517/microstructures.2024.110

BibTeX
@article{Tian2025,
  author = {Tian, Kaiwen and Fu, Yukang and Haq, Inzimamul and Kuang, Shuangyang and Xiong, Gaojie and Zhao, Zeyuan and Zhou, Tianyu and Weng, Jun and Peng, Xiang and Xiong, Liwei},
  title = {Fabrication of MOF-derived porous Au@Co-ZnO nanostructures with excellent C 2 H 5 OH sensing performance},
  journal = {Microstructures},
  year = {2025},
  volume = {5},
  number = {3},
  doi = {10.20517/microstructures.2024.110}
}
Kostenlos starten →