Spectroscopic Characteristics of Polymeric Surfaces Modified by DC Glow Plasma Treatment
IRAQI JOURNAL OF MATERIALS · 19.11.2024
DOI: 10.2022/tfm66389 ↗Kurz gefasst
Fachartikel in der Zeitschrift IRAQI JOURNAL OF MATERIALS, erschienen am 19.11.2024. Verfasst von Mohammed A.K. Ahmed.
Abstract (Originalsprache)
In this work, a low-pressure dc glow discharge plasma was generated and diagnosed using the electric probing method. Three different gases (Ar, N2, and SF6) were used to generate the discharge plasma. The generated plasma was used to treat the surfaces of thin films of polymeric materials (polycarbonate and polymethyl metha acrylic) prepared by solution cast method. The treatment process was performed at different treatment times. The optical and spectroscopic characteristics of the treated surfaces were introduced and compared to untreated surfaces. Results showed reasonable modifications in the surfaces as their transmittance and refractive index have changed with treatment time. Also, the surfaces treated with SF6 gas showed better characteristics than those treated with Ar and N2.
Schlagwörter
Zitieren
APA
Ahmed, M. A. (2024). Spectroscopic Characteristics of Polymeric Surfaces Modified by DC Glow Plasma Treatment. IRAQI JOURNAL OF MATERIALS. https://doi.org/10.2022/tfm66389
Vancouver
Ahmed MA. Spectroscopic Characteristics of Polymeric Surfaces Modified by DC Glow Plasma Treatment. IRAQI JOURNAL OF MATERIALS. 2024. doi:10.2022/tfm66389
BibTeX
@article{Ahmed2024,
author = {Ahmed, Mohammed A.K.},
title = {Spectroscopic Characteristics of Polymeric Surfaces Modified by DC Glow Plasma Treatment},
journal = {IRAQI JOURNAL OF MATERIALS},
year = {2024},
doi = {10.2022/tfm66389}
}
EUVIMED