EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Selected parameters of the combustion process in a compression-ignition engine at different angles of the beginning of injection of mixtures of rapeseed oil with n-hexane

Rafał Longwic, Michał Kuszneruk, Dawid Tatarynow

Combustion Engines · 02.07.2026 · 206 (3) · 3-8

DOI: 10.19206/ce-211599 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Combustion Engines, online erschienen am 10.12.2025. Verfasst von Rafał Longwic und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The article presents the results of experiments in which a compression-ignition engine was fueled with a mixture of rapeseed oil with a 10% addition of n-hexane. The effect of changing the fuel injection start angle on selected indicators of the combustion process was evaluated. The tests were conducted at a fixed vehicle speed of 90 km/h. The addition of n-hexane made it possible to improve the characteristics of the combustion process of rapeseed oil. The maximum combustion pressure increased to 9.5 MPa (ON: 9.66 MPa; OR: 8.71 MPa), and the ignition delay was shortened. Advancing the pilot injection by - 6° CA resulted in stabilization of the kinetic combustion phase; in reality, due to map interpolations and auto-adaptation strategies of the controller, the offset was approx. - 4° CA, indicating that it must be taken into account in the interpretation of the results. The average indexed pressure reached 0.805 MPa (ON: 0.813 MPa; OR: 0.728 MPa), and the maximum pressure build-up rate (dp/dα) reached 0.375 MPa/°CA, approaching the 0.399 MPa/°CA recorded for ON. The rate of heat release was in the range of 86-93 kJ/m³-°CA, clearly lower than that of OR (130 kJ/m³-°CA). The results confirm that appropriate modification of the fuel composition, together with a properly selected injection angle, allows compression-ignition engines to burn renewable fuels. The results of the measurements were described with regression relationships, which allows their use in further simulation and development work.

Zitieren

APA

Longwic, R., Kuszneruk, M., & Tatarynow, D. (2026). Selected parameters of the combustion process in a compression-ignition engine at different angles of the beginning of injection of mixtures of rapeseed oil with n-hexane. Combustion Engines, 206(3), 3-8. https://doi.org/10.19206/ce-211599

Vancouver

Longwic R, Kuszneruk M, Tatarynow D. Selected parameters of the combustion process in a compression-ignition engine at different angles of the beginning of injection of mixtures of rapeseed oil with n-hexane. Combustion Engines. 2026;206(3):3-8. doi:10.19206/ce-211599

BibTeX
@article{Longwic2026,
  author = {Longwic, Rafał and Kuszneruk, Michał and Tatarynow, Dawid},
  title = {Selected parameters of the combustion process in a compression-ignition engine at different angles of the beginning of injection of mixtures of rapeseed oil with n-hexane},
  journal = {Combustion Engines},
  year = {2026},
  volume = {206},
  number = {3},
  pages = {3--8},
  doi = {10.19206/ce-211599}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche