EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The model of combustion process in the marine 4-stroke engine for exhaust gas composition assessment

Jerzy KOWALSKI

Combustion Engines · 01.05.2016 · 165 (2) · 60-69

DOI: 10.19206/ce-2016-208 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Combustion Engines, online erschienen am 01.05.2016. Verfasst von Jerzy KOWALSKI. Die Arbeit wurde bisher 5-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paper presents the model of combustion process in the marine, turbocharged, 4-stroke and Diesel engine. The main target of modeling is the assessment of the exhaust gas composition. Presented multi-zone, 3-D model of combustion process consists of the following sub-models of processes: the fuel injection, the brake-up and the evaporation of fuel and the turbulence flow and the heat transfer phenomena. Presented model basis on the 3Z-ECFM mechanism of combustion and the initial and boundary conditions collected during direct measurements. The positive validation of the calculation results are obtained for mean and maximum value of the combustion pressure and values of oxygen and nitric oxides fractions in the exhaust gas. Unfortunately, fractions of carbon compounds in the exhaust gas are not properly calculated.

Zitieren

APA

KOWALSKI, J. (2016). The model of combustion process in the marine 4-stroke engine for exhaust gas composition assessment. Combustion Engines, 165(2), 60-69. https://doi.org/10.19206/ce-2016-208

Vancouver

KOWALSKI J. The model of combustion process in the marine 4-stroke engine for exhaust gas composition assessment. Combustion Engines. 2016;165(2):60-69. doi:10.19206/ce-2016-208

BibTeX
@article{KOWALSKI2016,
  author = {KOWALSKI, Jerzy},
  title = {The model of combustion process in the marine 4-stroke engine for exhaust gas composition assessment},
  journal = {Combustion Engines},
  year = {2016},
  volume = {165},
  number = {2},
  pages = {60--69},
  doi = {10.19206/ce-2016-208}
}
Kostenlos starten →