EUVIMEDEUVIMED entdecken
Crossref

Optimization of Blade Geometry and its Orientation based on Piercing Force for Debarking Jigat Trees

K.T. Jazal, P.R. Jayan, Sanchu Sukumaran, Vaisakh Venu, Hiba Fathima, M. Vasudevan, U. Princy

Agricultural Science Digest - A Research Journal · 29.07.2026 · (Of)

DOI: 10.18805/ag.d-6502 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Agricultural Science Digest - A Research Journal, online erschienen am 29.07.2026. Verfasst von K.T. Jazal und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Jigat bark is a key important binding material in the agarbatti industry owing to its excellent adhesive property. However, owing to lack of mechanization, debarking is still mostly performed by manual operation, increasing human effort and decreasing the overall output. To support the design of a mechanized debarking machine, this study examined the effects of rake angle and blade thickness on piercing force, insertion depth and overall debarking efficiency.

Methods

The experiments were conducted with the help of piercing force setup, it consisting of an S-type load cell, chisel, bark gauge/steel ruler and digital indicator with four rake angles (30°, 40°, 50° and 90°) and three blade thicknesses (1, 2 and 3 mm).

Result

Two-way analysis of variance showed that the rake angle significantly influenced the piercing force [F (3,48) = 19.45, p = 2.16 x 10-8] and insertion depth [F (3,48) = 74.95, p = 3.95 x 10-18]. The blade thickness also significantly affected the piercing force [F (2,48) = 3.68, p = 0.0327] and insertion depth [F (2,48) = 4.60, p = 0.0149]. No significant interactions were detected during the evaluation, suggesting that both variables functioned independently. According to the regression analysis, observed that piercing force increased with blade thickness (c = 0.467, p = 0.015) and rake angle (b = 0.443, p = 0.039). The force-normalized insertion compliance (ç = D/F) declined as the thickness of the blade increased (c = -0.79, p = 0.013). Bark’s hardness was measured at 490 N, 50% compression and 5 mm penetration and its average moisture content was 58.4%. For practical debarking, a 2 mm blade was chosen because it was more durability and better suited for repeated impact, even though a 1 mm blade with a 40° rake angle needed less piercing force.

Zitieren

APA

Jazal, K., Jayan, P., Sukumaran, S., Venu, V., Fathima, H., Vasudevan, M., & Princy, U. (2026). Optimization of Blade Geometry and its Orientation based on Piercing Force for Debarking Jigat Trees. Agricultural Science Digest - A Research Journal. https://doi.org/10.18805/ag.d-6502

Vancouver

Jazal K, Jayan P, Sukumaran S, Venu V, Fathima H, Vasudevan M, et al. Optimization of Blade Geometry and its Orientation based on Piercing Force for Debarking Jigat Trees. Agricultural Science Digest - A Research Journal. 2026. doi:10.18805/ag.d-6502

BibTeX
@article{Jazal2026,
  author = {Jazal, K.T. and Jayan, P.R. and Sukumaran, Sanchu and Venu, Vaisakh and Fathima, Hiba and Vasudevan, M. and Princy, U.},
  title = {Optimization of Blade Geometry and its Orientation based on Piercing Force for Debarking Jigat Trees},
  journal = {Agricultural Science Digest - A Research Journal},
  year = {2026},
  number = {Of},
  doi = {10.18805/ag.d-6502}
}
Kostenlos starten →