EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Case study of the advanced octagonal cross-section self lifting hybrid tower buckling behavior

Ziteng Wang, Rongjun Yang, Junqiang Wen, Xiangguo Wu, Arun Paudel, Shuo Zhang, Yuncheng Ge, Hanyuanbin Wang, Kabin Lamichhane

Journal of Asian Concrete Federation · 31.07.2026 · 12 (3) · 35-45

DOI: 10.18702/acf.2026.12.3.35 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Asian Concrete Federation, online erschienen am 31.07.2026. Verfasst von Ziteng Wang und 8 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The buckling behavior, as a key issue of the advanced self lifting steel–concrete hybrid tower, was analyzed in this paper. A simplified calculation method and an empirical formula were developed to estimate the critical buckling load of the tower structure. Both linear and nonlinear buckling analyses were performed for hybrid and reinforced concrete towers to identify their buckling modes, failure mechanisms, and weak sections. Case study results indicate that, in the steel–concrete composite system, the steel segment buckles before the concrete portion. For the concrete tower, the midsection (T3) exhibits earlier buckling than the bottom section, confirming T3 as the weak buckling zone. The linear buckling critical load was consistently higher than the nonlinear one, with nonlinear analysis providing results closer to realistic conditions. The geometric characteristics of the tower exert a strong influence on its buckling behavior: the critical buckling load increases nonlinearly with the base diameter (D) and wall thickness (t2) , showing diminishing sensitivity at larger values, while it decreases sharply and nonlinearly with the height of the middle concrete section (H3), indicating a strong adverse effect of slenderness on structural stability. These case study may provide reference for optimizing the geometric design and stability assessment of hybrid wind turbine tower structures.

Zitieren

APA

Wang, Z., Yang, R., Wen, J., Wu, X., Paudel, A., Zhang, S., Ge, Y., Wang, H., & Lamichhane, K. (2026). Case study of the advanced octagonal cross-section self lifting hybrid tower buckling behavior. Journal of Asian Concrete Federation, 12(3), 35-45. https://doi.org/10.18702/acf.2026.12.3.35

Vancouver

Wang Z, Yang R, Wen J, Wu X, Paudel A, Zhang S, et al. Case study of the advanced octagonal cross-section self lifting hybrid tower buckling behavior. Journal of Asian Concrete Federation. 2026;12(3):35-45. doi:10.18702/acf.2026.12.3.35

BibTeX
@article{Wang2026,
  author = {Wang, Ziteng and Yang, Rongjun and Wen, Junqiang and Wu, Xiangguo and Paudel, Arun and Zhang, Shuo and Ge, Yuncheng and Wang, Hanyuanbin and Lamichhane, Kabin},
  title = {Case study of the advanced octagonal cross-section self lifting hybrid tower buckling behavior},
  journal = {Journal of Asian Concrete Federation},
  year = {2026},
  volume = {12},
  number = {3},
  pages = {35--45},
  doi = {10.18702/acf.2026.12.3.35}
}
Kostenlos starten →