EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

PV array MPPT algorithm for suppressing memory inertia and voltage oscillation

Qizhuo Dong, Huiwen Qiao, Ying Wu, Lehang Yang, Minghan Jia

Clean Energy Science and Technology · 20.07.2026

DOI: 10.18686/cest824 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clean Energy Science and Technology, online erschienen am 20.07.2026. Verfasst von Qizhuo Dong und 4 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Variations in irradiation and temperature can decrease the power generated by PV systems and lead to instability in maximum power point tracking (MPPT). The traditional MPPT methods, such as conventional particle swarm optimization (PSO), perturb and observe (P&O), and incremental conductance (INC), are known to have slow convergence speed, tracking errors, voltage oscillations, and poor response under highly dynamic environmental conditions. Given these drawbacks, this paper presents a voltage-suppression PSO-MPPT algorithm for enhancing the dynamic response, tracking accuracy, and stability of the system. The proposed method eliminates the personal historical best value from the PSO structure to create a memory-less PSO. This decreases cognitive inertia and increases the adaptability of particles in tracking. Moreover, a 4-stage dynamic voltage gradient suppression mechanism is designed to control voltage transients and suppress voltage transitions. Furthermore, a dual-sentinel detection strategy is implemented to increase the steady-state accuracy and to prevent local stagnation during MPPT operation. The evaluation of the algorithm performance is conducted via Matlab/Simulink simulation under standard conditions, partial shading, and temperature change. The results indicate that, under normal conditions, the settling time is decreased by 37.5%, and the voltage oscillation is reduced by 28.6%. Partial shading results in much faster dynamic re-track speed, and the tests for temperature variation indicate a 62.7% faster response time and voltage ripple reduction. The proposed algorithm also provides good steady-state error and low RMSE compared to the conventional PSO, P&O, and INC methods. No hardware validation has been carried out yet, but the method is lightweight and requires less computational power, and can be applied to low-cost PV systems.

Zitieren

APA

Dong, Q., Qiao, H., Wu, Y., Yang, L., & Jia, M. (2026). PV array MPPT algorithm for suppressing memory inertia and voltage oscillation. Clean Energy Science and Technology. https://doi.org/10.18686/cest824

Vancouver

Dong Q, Qiao H, Wu Y, Yang L, Jia M. PV array MPPT algorithm for suppressing memory inertia and voltage oscillation. Clean Energy Science and Technology. 2026. doi:10.18686/cest824

BibTeX
@article{Dong2026,
  author = {Dong, Qizhuo and Qiao, Huiwen and Wu, Ying and Yang, Lehang and Jia, Minghan},
  title = {PV array MPPT algorithm for suppressing memory inertia and voltage oscillation},
  journal = {Clean Energy Science and Technology},
  year = {2026},
  doi = {10.18686/cest824}
}
Kostenlos starten →