Adsorptive desulfurization of model fuel by activated carbon prepared from Bienertia sinuspersici biomass waste
Nafta-Gaz · 2026-04 · 82 (2) · 169-175
DOI: 10.18668/ng.2026.02.06 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nafta-Gaz, 2026-04. Verfasst von Sama Shakir und 2 weiteren Autor:innen.
Abstract (Originalsprache)
Sulfur-containing compounds lead to engine wear, corrosion, excessive emissions, and reduced performance. Efficient desulfurization enhances engine reliability and reduces its environmental impact. Adsorption provides an economic, sustainable, and efficient solution for fuel desulfurization. High-surface-area activated carbon with nanopores, prepared from Bienertia sinuspersici (BSAC), a promising biomass precursor, was examined for its performance in adsorbing sulfur compounds, specifically dibenzothiophene (DBT), from a model fuel using a batch experiment setup. The prepared activated carbon had a surface area and pore volume of 1661.9 m2/g and 0.9411 cm3/g, respectively. The effects of key adsorption process parameters, such as contact time (30–150 minutes), initial DBT concentration (1000–5000 ppm), and adsorbent dose (100–500 mg), were evaluated to optimize sulfur adsorption capacity and removal efficiency. All adsorption experiments were conducted at a constant temperature of 25°C and an agitation speed of 150 rpm. The desulfurization isotherms and kinetics of DBT in the model fuel were examined in this study. The results illustrated that the adsorbent dose and initial concentration were key parameters strongly impacting both adsorption capacity and removal efficiency. The adsorption capacity of DBT reached a maximum of 36.12 mg/g at 5000 ppm with a 200 mg adsorbent dose and a contact time of 90 minutes. The highest desulfurization efficiency of 88.8% was achieved at an adsorbent dose of 400 mg, with an initial concentration of 5000 ppm and a contact time of 90 minutes. The equilibrium data were well fitted to the Langmuir isotherm (R2 = 0.95), compared with the Freundlich, Temkin, and Dubinin-Radushkevich isotherms, indicating monolayer adsorption on a uniform surface. The kinetic data showed that DBT adsorption was best fitted with the pseudo-second-order kinetics model, yielding a higher value of the correlation coefficient (R2 = 0).
Zitieren
APA
Shakir, S., Jassim, N., & Dakhil, S. (2026). Adsorptive desulfurization of model fuel by activated carbon prepared from Bienertia sinuspersici biomass waste. Nafta-Gaz, 82(2), 169-175. https://doi.org/10.18668/ng.2026.02.06
Vancouver
Shakir S, Jassim N, Dakhil S. Adsorptive desulfurization of model fuel by activated carbon prepared from Bienertia sinuspersici biomass waste. Nafta-Gaz. 2026;82(2):169-175. doi:10.18668/ng.2026.02.06
BibTeX
@article{Shakir2026,
author = {Shakir, Sama and Jassim, Nawras and Dakhil, Saadoon},
title = {Adsorptive desulfurization of model fuel by activated carbon prepared from Bienertia sinuspersici biomass waste},
journal = {Nafta-Gaz},
year = {2026},
volume = {82},
number = {2},
pages = {169--175},
doi = {10.18668/ng.2026.02.06}
}
EUVIMED