EUVIMEDEUVIMED entdecken
Crossref

Study on the effect of new compositions on the breakdown of stable water-in-oil emulsions

Guseyn Gurbanov, Aysel Gasimzade, Zeynab Abdullayeva

Nafta-Gaz · 2026-04 · 82 (2) · 146-155

DOI: 10.18668/ng.2026.02.04 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nafta-Gaz, 2026-04. Verfasst von Guseyn Gurbanov und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increase in the production of high-viscosity crude oils often leads to the formation of persistent water-in-oil emulsions, mainly due to the presence of formation water during extraction. These emulsions hinder transportation and processing because they contain high levels of asphaltenes, resins, paraffins, salts, and mechanical impurities. These components act as natural emulsifiers, increasing viscosity and corrosiveness, raising operational costs, reducing processing efficiency, and accelerating equipment wear. This study evaluates the effectiveness of newly developed multifunctional KA-series compositions (KA-1, KA-2, KA-3) in breaking persistent emulsions under laboratory conditions. The formulations were developed using BAF-1, gossypol resin (a corrosion inhibitor), and commercial demulsifiers (ND-12, Difron-9426, Alkan-415), and were tested on crude oil from the Absheron (35% water), Sangachal (30%), and Dashgil (32%) fields in Azerbaijan. Experiments were carried out at temperatures of 20–50°C, reagent concentrations of 50–500 g/t, and contact times of 40–120 minutes. Demulsification efficiency increased with both temperature and reagent concentration, reaching optimal values at 50°C after 120 minutes. For all three fields – Absheron, Sangachal, and Dashgil – the optimal dosages of the KA-series demulsifiers ranged from 150 to 500 g/t, providing approximately 98–99% separation efficiency in the tested samples. The KA compositions also reduced residual water, mechanical impurities, and chloride content. For example, KA-2 lowered chloride concentration in the Absheron sample from 417.4 to 103.4 mg/L and reduced mechanical impurities from 1.63% to 0.05%, with similar trends observed in other samples. This study demonstrates that multifunctional demulsifiers tailored to the specific challenges of heavy crude oils outperform single-component reagents. The findings provide a scientific basis for improving oil-treatment processes, especially in fields with high water content and stable emulsion formation. The KA-series formulations show strong potential for industrial application in such reservoirs. The novelty of this study lies in the development and laboratory validation of multifunctional KA-series demulsifier formulations specifically tailored for high-viscosity crude oils, ensuring both high separation efficiency and reduced residual water content. These results contribute to the optimization of crude oil dehydration processes, enabling more efficient and environmentally sustainable oil production.

Zitieren

APA

Gurbanov, G., Gasimzade, A., & Abdullayeva, Z. (2026). Study on the effect of new compositions on the breakdown of stable water-in-oil emulsions. Nafta-Gaz, 82(2), 146-155. https://doi.org/10.18668/ng.2026.02.04

Vancouver

Gurbanov G, Gasimzade A, Abdullayeva Z. Study on the effect of new compositions on the breakdown of stable water-in-oil emulsions. Nafta-Gaz. 2026;82(2):146-155. doi:10.18668/ng.2026.02.04

BibTeX
@article{Gurbanov2026,
  author = {Gurbanov, Guseyn and Gasimzade, Aysel and Abdullayeva, Zeynab},
  title = {Study on the effect of new compositions on the breakdown of stable water-in-oil emulsions},
  journal = {Nafta-Gaz},
  year = {2026},
  volume = {82},
  number = {2},
  pages = {146--155},
  doi = {10.18668/ng.2026.02.04}
}
Kostenlos starten →