EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Behavior of Sustainable Ferrocement Voided Slabs Incorporating Recycled Aluminum Beverage Cans and Polypropylene Fibers

Omer K Fayadh, Omar Shamal Farhan, Mohammed Hmood Mohana, Ziadoon Mohsin Ali, Sheelan Mahmoud Hama

International Journal on Advanced Science, Engineering and Information Technology · 25.10.2026 · 16 (5) · 1745-1752

DOI: 10.18517/ijaseit.16.5.14640 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal on Advanced Science, Engineering and Information Technology, online erschienen am 25.10.2026. Verfasst von Omer K Fayadh und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents a sustainable ferrocement slab system with recycled aluminum beverage cans as internal void formers and polypropylene fibers (PPFs), and evaluates it experimentally. We conducted four-point bending tests on six 1000 × 400 × 80 mm one-way ferrocement slabs. We investigated the number of longitudinal aluminum void lines (two or three), the slab type (solid or voided), and the addition of 1% PPFs. The mortar's flowability and compressive strength were assessed alongside the structural testing. PPFs increased the compressive strength by 7.4% while decreasing the mortar flow diameter by 19.6%. Because the effective cross-sectional area was decreased, the introduction of internal voids decreased the cracking load, ultimate load, stiffness, and toughness. Increasing the number of void lines from two to three amplified these reductions. However, by increasing ductility, fracture distribution, and energy absorption, adding PPFs considerably improved the post-cracking behavior of both solid and voided slabs. After adding PPFs, toughness increased from 339.57 to 425.52 kN·mm, and the ultimate deflection of the slab with three void lines increased from 13.24 mm to 29.38 mm. Crack pattern observations show that PPFs successfully bridged cracks, postponed crack localization, and encouraged a more uniform crack distribution. The findings show that PPFs offset some strength and stiffness losses by enhancing ductility and slab behavior, while recycled aluminum beverage cans can serve as sustainable internal void formers in ferrocement slabs.

Zitieren

APA

Fayadh, O. K., Farhan, O. S., Mohana, M. H., Ali, Z. M., & Hama, S. M. (2026). Behavior of Sustainable Ferrocement Voided Slabs Incorporating Recycled Aluminum Beverage Cans and Polypropylene Fibers. International Journal on Advanced Science, Engineering and Information Technology, 16(5), 1745-1752. https://doi.org/10.18517/ijaseit.16.5.14640

Vancouver

Fayadh OK, Farhan OS, Mohana MH, Ali ZM, Hama SM. Behavior of Sustainable Ferrocement Voided Slabs Incorporating Recycled Aluminum Beverage Cans and Polypropylene Fibers. International Journal on Advanced Science, Engineering and Information Technology. 2026;16(5):1745-1752. doi:10.18517/ijaseit.16.5.14640

BibTeX
@article{Fayadh2026,
  author = {Fayadh, Omer K and Farhan, Omar Shamal and Mohana, Mohammed Hmood and Ali, Ziadoon Mohsin and Hama, Sheelan Mahmoud},
  title = {Behavior of Sustainable Ferrocement Voided Slabs Incorporating Recycled Aluminum Beverage Cans and Polypropylene Fibers},
  journal = {International Journal on Advanced Science, Engineering and Information Technology},
  year = {2026},
  volume = {16},
  number = {5},
  pages = {1745--1752},
  doi = {10.18517/ijaseit.16.5.14640}
}
Kostenlos starten →