Finite Element Analysis of Stress Concentration and Deformation in Steel Plate Connections under Combined Axial Compression and Bending Loads
International Journal on Advanced Science, Engineering and Information Technology · 19.04.2026 · 16 (2) · 425-431
DOI: 10.18517/ijaseit.16.2.13489 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal on Advanced Science, Engineering and Information Technology, online erschienen am 19.04.2026. Verfasst von Katea Luaibi Hamid und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This research emphasizes that the fundamental load transfer entities, specifically the connections, constitute the most critical details for designers handling advanced metal structures in their core production lines. This is primarily because stress concentration phenomena typically present a significantly more complex challenge concerning the safety of steel structures. The thermal (3D) numerical model employed for the 4φ and the particle count derived from this model demonstrate high accuracy. Results reveal that, for each compass point, the maximum peak von Mises stress under axial compression loads varies by approximately 35% relative to the combined loading condition. Additionally, localized stresses are predominantly concentrated around bolt holes and plate edges. Furthermore, an extensive parametric analysis indicates that an increase in maximum deformation from 10 mm to 20 mm, coupled with single-sided load eccentricity, results in an additional stress accumulation of about 28% compared to the maximum deformation alone. These findings underpin principles essential to steel connection design and performance, extending beyond conventional practices prescribed by codes. Load eccentricity, in particular, contributes to heightened stress concentrations by generating more localized stresses near the connection region. It is generally crucial for steel plate connection designs to account for various loading scenarios. The proposed finite element model provides valuable insights into stress distribution and structural response—details often absent in traditional analytical approaches. Such insights are instrumental for engineers aiming to optimize connection design, considering aspects such as geometry, plate thickness, and external load alignment. Ultimately, these advancements can enhance the safety and durability of steel structures over time.
Zitieren
APA
Hamid, K. L., Hassan, A. D., Alzubaidi, A. A. H., & Al-Fahad, I. O. B. (2026). Finite Element Analysis of Stress Concentration and Deformation in Steel Plate Connections under Combined Axial Compression and Bending Loads. International Journal on Advanced Science, Engineering and Information Technology, 16(2), 425-431. https://doi.org/10.18517/ijaseit.16.2.13489
Vancouver
Hamid KL, Hassan AD, Alzubaidi AAH, Al-Fahad IOB. Finite Element Analysis of Stress Concentration and Deformation in Steel Plate Connections under Combined Axial Compression and Bending Loads. International Journal on Advanced Science, Engineering and Information Technology. 2026;16(2):425-431. doi:10.18517/ijaseit.16.2.13489
BibTeX
@article{Hamid2026,
author = {Hamid, Katea Luaibi and Hassan, Azzam D. and Alzubaidi, Asaad A. H. and Al-Fahad, Imad O. Bachi},
title = {Finite Element Analysis of Stress Concentration and Deformation in Steel Plate Connections under Combined Axial Compression and Bending Loads},
journal = {International Journal on Advanced Science, Engineering and Information Technology},
year = {2026},
volume = {16},
number = {2},
pages = {425--431},
doi = {10.18517/ijaseit.16.2.13489}
}
EUVIMED