EUVIMEDEUVIMED entdecken
Crossref

Influence of the Teeth Number on the Gear Module Value and Load Capacity of Gear Pair in Universal Helical Gear Drives

Milan Rackov, Mirko Blagojević, Siniša Kuzmanović, Miloš Matejić, Ivan Knežević, Maja Čavić

Applied Engineering Letters : Journal of Engineering and Applied Sciences · 2018

DOI: 10.18485/aeletters.2018.3.1.4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Engineering Letters : Journal of Engineering and Applied Sciences, 2018. Verfasst von Milan Rackov und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The basic parameters of the universal gear drives, except the axis height, are not defined by the standard, so the manufacturers of universal gear reducers can define them in their way. Most of the manufacturers followed the parameter values of universal gear reducers of leading world producers in order to ensure their interchangeability and the better positioning of their gear units at the market. This paper deals with the analysis of the influence of the gear pair teeth number on the size of the module, as well as on the load carrying capacity of single-stage universal gear units. For defined gear ratio values, different combinations of teeth number of pinion and driven gear were selected. Further, it was made calculation of the basic geometric dimensions of the gear pair, as well as the load capacity. ARTICLE HISTORY Received 10.01.2018 Accepted 28.02.2018 Available 15.03.2018

Zitieren

APA

Rackov, M., Blagojević, M., Kuzmanović, S., Matejić, M., Knežević, I., & Čavić, M. (2018). Influence of the Teeth Number on the Gear Module Value and Load Capacity of Gear Pair in Universal Helical Gear Drives. Applied Engineering Letters : Journal of Engineering and Applied Sciences. https://doi.org/10.18485/aeletters.2018.3.1.4

Vancouver

Rackov M, Blagojević M, Kuzmanović S, Matejić M, Knežević I, Čavić M. Influence of the Teeth Number on the Gear Module Value and Load Capacity of Gear Pair in Universal Helical Gear Drives. Applied Engineering Letters : Journal of Engineering and Applied Sciences. 2018. doi:10.18485/aeletters.2018.3.1.4

BibTeX
@article{Rackov2018,
  author = {Rackov, Milan and Blagojević, Mirko and Kuzmanović, Siniša and Matejić, Miloš and Knežević, Ivan and Čavić, Maja},
  title = {Influence of the Teeth Number on the Gear Module Value and Load Capacity of Gear Pair in Universal Helical Gear Drives},
  journal = {Applied Engineering Letters : Journal of Engineering and Applied Sciences},
  year = {2018},
  doi = {10.18485/aeletters.2018.3.1.4}
}
Kostenlos starten →