EUVIMEDEUVIMED entdecken
Crossref

Effects of Thin Film Morphology of Polymer Hole Transfer Material on Photovoltaic Performance of Perovskite Solar Cells

Oguz CİCEK, Burak GÜLTEKİN

Celal Bayar Üniversitesi Fen Bilimleri Dergisi · 2022

DOI: 10.18466/cbayarfbe.1033596 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Celal Bayar Üniversitesi Fen Bilimleri Dergisi, 2022. Verfasst von Oguz CİCEK und 1 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Gefördert von: Cumhurbaşkanlığı Strateji ve Bütçe Başkanlığı.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present study, the effects of chain length variation of Poly(3-hexyl) thiophene polymer, which is one of the appropriate alternatives of Spiro-O-MeTAD used as a hole transfer layer (HTL) in perovskite-based solar cells (PSC), on thin-film morphology and device performance were investigated. Furthermore, nanowires of long (UZ) and short-chain (KZ) P3HT were obtained in the solution phase and then comparative photovoltaic performance analyses were carried out by fabricating PSC devices. As a result, it was determined that the morphological changes resulting from the polymer chain length directly affect the charge transfer between the active layer and HTL. KZ-P3HT presented better performance than both standard P3HT (5.99) and UZ-P3HT (2.68) polymers with a power conversion efficiency (PCE) of 7.74%. It was demonstrated that the main reason for this is that the fringed structure, detected by AFM images, increases the contact ratio at the perovskite/HTM interface. In addition, thanks to the morphological improvements in nano-wire studies, it was observed that the photovoltaic performance of the PSC device containing UZ-P3HT increased by 5.51%. Contrary to UZ-P3HT, it was determined that after the conversion of KZ-P3HT to the nanowire, the fringed structure on the surface disappeared and therefore the efficiency decreased to 5.81%.

Förderung

  • Cumhurbaşkanlığı Strateji ve Bütçe Başkanlığı

Zitieren

APA

CİCEK, O., & GÜLTEKİN, B. (2022). Effects of Thin Film Morphology of Polymer Hole Transfer Material on Photovoltaic Performance of Perovskite Solar Cells. Celal Bayar Üniversitesi Fen Bilimleri Dergisi. https://doi.org/10.18466/cbayarfbe.1033596

Vancouver

CİCEK O, GÜLTEKİN B. Effects of Thin Film Morphology of Polymer Hole Transfer Material on Photovoltaic Performance of Perovskite Solar Cells. Celal Bayar Üniversitesi Fen Bilimleri Dergisi. 2022. doi:10.18466/cbayarfbe.1033596

BibTeX
@article{CCEK2022,
  author = {CİCEK, Oguz and GÜLTEKİN, Burak},
  title = {Effects of Thin Film Morphology of Polymer Hole Transfer Material on Photovoltaic Performance of Perovskite Solar Cells},
  journal = {Celal Bayar Üniversitesi Fen Bilimleri Dergisi},
  year = {2022},
  doi = {10.18466/cbayarfbe.1033596}
}
Kostenlos starten →