EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Generación de Combustibles Líquidos Mediante el Proceso de Pirólisis a partir de Polipropileno y Poliestireno para su Aprovechamiento Energético

Bryan Montalvo Verduga, Nicole L. Roman Roman, Diana K. Fabara Salazar

ACI Avances en Ciencias e Ingenierías · 2025

DOI: 10.18272/aci.3797 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACI Avances en Ciencias e Ingenierías, 2025. Verfasst von Bryan Montalvo Verduga und 2 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To valorize polypropylene (PP) y polystyrene (PS) waste by generating liquid fuels, a pyrolysis process was conducted using a horizontal fixed-bed Shaftherm reactor. Temperature ramps of 500, 600, y 700°C with times of 60, 90, y 120 minutes were used. At temperatures below 500°C, the process was incomplete, yielding only melted polymer. Starting from 500°C, the process was complete, improving with reaction time. For PP, a liquid fraction yield of 56,97% at 500°C y 60 minutes was recovered, increasing to 86,64% at 700°C. For PS, the best yields were obtained at 600°C, with recoveries between 90,36% y 92,63% at 90 minutes. The liquid fractions from PP at 500°C, containing C2-C10 hydrocarbons, resemble commercial extra gasoline C4-C10, while the PS fractions are rich in styrene y C2-C18 chains. Highlighting their high energy potential, PP showed a calorific value between 42 236,64 kJ/kg y 45 005,34 kJ/kg, y PS between 37 401,38 kJ/kg y 43 107,50 kJ/kg. The comparative analysis of the calorific value between the generated liquid fractions y commercial fuels (diésel y gasoline) demonstrated that the obtained products have high potential as energy sources, with PP having a higher calorific value than diésel y extra gasoline. Quality results, such as density y viscosity, were encouraging for industrial applications, y chromatographic analysis revealed the presence of valuable compounds, suggesting their potential use in the chemical industry. Although some parameters did not meet INEN standards, the liquid fractions show significant similarities with commercial fuels, suggesting their viability as an alternative energy source.

Zitieren

APA

Verduga, B. M., Roman, N. L. R., & Salazar, D. K. F. (2025). Generación de Combustibles Líquidos Mediante el Proceso de Pirólisis a partir de Polipropileno y Poliestireno para su Aprovechamiento Energético. ACI Avances en Ciencias e Ingenierías. https://doi.org/10.18272/aci.3797

Vancouver

Verduga BM, Roman NLR, Salazar DKF. Generación de Combustibles Líquidos Mediante el Proceso de Pirólisis a partir de Polipropileno y Poliestireno para su Aprovechamiento Energético. ACI Avances en Ciencias e Ingenierías. 2025. doi:10.18272/aci.3797

BibTeX
@article{Verduga2025,
  author = {Verduga, Bryan Montalvo and Roman, Nicole L. Roman and Salazar, Diana K. Fabara},
  title = {Generación de Combustibles Líquidos Mediante el Proceso de Pirólisis a partir de Polipropileno y Poliestireno para su Aprovechamiento Energético},
  journal = {ACI Avances en Ciencias e Ingenierías},
  year = {2025},
  doi = {10.18272/aci.3797}
}
Kostenlos starten →