Technology for obtaining potassium titanate by ilmenite alkaline leaching with potassium hydroxide
Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales · 04.05.2026
DOI: 10.18257/raccefyn.3579 ↗Kurz gefasst
Fachartikel in der Zeitschrift Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales, online erschienen am 04.05.2026. Verfasst von Snizhana Kucheruk und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Among other uses, potassium titanate enhances materials’ heat resistance in the ceramic industry, acts as a dielectric and component of piezoelectric devices in electronics, and facilitates the production of catalytic materials. Here, we used ilmenite concentrate (96%) from the Irshansky deposit in Ukraine’s Zhytomyr region, characterized by a high TiO2 content, as a promising raw material for synthesizing potassium titanate. We aimed to synthesize potassium titanate (K2TiO3) via alkaline leaching of ilmenite and to determine the optimal process conditions for achieving a high degree of titanium(IV) extraction. The methodology included alkaline leaching under controlled temperature, time, particle size, and FeTiO3:KOH molar ratio, followed by phase and morphological characterization of the product obtained. The experimental results showed that the optimal leaching conditions include an ilmenite particle size of ≤71 μm, a FeTiO3:KOH molar ratio of 1:2, a temperature of 453 K, and a leaching duration of 3 h, providing a titanium(IV) extraction degree of 86.7%. Further increases in temperature or alkali content resulted in only a slight increase in extraction efficiency (up to 89.7%), which was deemed economically unfeasible. The high efficiency of the process was attributed to an increased reaction surface area, optimal thermal conditions, and favorable thermodynamic parameters. A technological scheme for the potential industrial production of potassium titanate is proposed based on these results, with prospects for reduced energy consumption, improved environmental safety, and minimal raw material losses.
Zitieren
APA
Kucheruk, S., Kaminskyi, O., Denysiuk, R., Anichkina, O., Yevdochenko, O., & Avdieieva, O. (2026). Technology for obtaining potassium titanate by ilmenite alkaline leaching with potassium hydroxide. Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales. https://doi.org/10.18257/raccefyn.3579
Vancouver
Kucheruk S, Kaminskyi O, Denysiuk R, Anichkina O, Yevdochenko O, Avdieieva O. Technology for obtaining potassium titanate by ilmenite alkaline leaching with potassium hydroxide. Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales. 2026. doi:10.18257/raccefyn.3579
BibTeX
@article{Kucheruk2026,
author = {Kucheruk, Snizhana and Kaminskyi, Oleksandr and Denysiuk, Roman and Anichkina, Olena and Yevdochenko, Olena and Avdieieva, Olga},
title = {Technology for obtaining potassium titanate by ilmenite alkaline leaching with potassium hydroxide},
journal = {Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales},
year = {2026},
doi = {10.18257/raccefyn.3579}
}
EUVIMED