EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Study of the structural and optical properties of CuInSe₂ thin films obtained by RF sputtering as a function of the deposition temperature

Jorge Montes-Monsalve, Roberto Bernal-Correa, Arturo Morales-Acevedo, Álvaro Pulzara-Mora

Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales · 17.09.2025 · 49 (192) · 532-545

DOI: 10.18257/raccefyn.3225 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales, online erschienen am 17.09.2025. Verfasst von Jorge Montes-Monsalve und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The formation of a copper-deficient surface layer is a common phenomenon in CuInSe₂ thin films, typically arising in deposition processes that involve multiple steps, such as thermal treatment and post-selenization. Here, we studied the radio-frequency magnetron sputtering film deposition from a CuInSe₂ target. Substrate temperature varied between 50 and 400°C. X-ray photoelectron spectroscopy (XPS) confirmed the persistent presence of a Cu-deficient surface layer across all deposition temperatures. Films grown below 200°C were amorphous and Cu-deficient, while at 200°C and above, the films exhibited a transition to a polycrystalline chalcopyrite structure, as evidenced by X-ray diffraction (XRD). The crystallite size for the polycrystalline films deposited at 200°C and 400°C was approximately 10–12 nm. Energy dispersive spectroscopy (EDS) revealed a progressive decrease in copper content from ~20 at.% at 50–200°C to ~16 at.% at 400°C, while indium remained nearly constant and selenium increased slightly from 50 at.% to 56 at.% with increasing temperature. UV-Vis spectroscopy showed that the optical bandgap (Eg) decreased from 1.2 eV at 50°C and 1.15 eV at 100°C to approximately 0.95–0.94 eV at 200°C and 400°C. Our results provide valuable insights into the effect of substrate temperature on CuInSe2 thin films, contributing to the ongoing efforts to optimize their properties for photovoltaic and optoelectronic applications.

Zitieren

APA

Montes-Monsalve, J., Bernal-Correa, R., Morales-Acevedo, A., & Pulzara-Mora, Á. (2025). Study of the structural and optical properties of CuInSe₂ thin films obtained by RF sputtering as a function of the deposition temperature. Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales, 49(192), 532-545. https://doi.org/10.18257/raccefyn.3225

Vancouver

Montes-Monsalve J, Bernal-Correa R, Morales-Acevedo A, Pulzara-Mora Á. Study of the structural and optical properties of CuInSe₂ thin films obtained by RF sputtering as a function of the deposition temperature. Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales. 2025;49(192):532-545. doi:10.18257/raccefyn.3225

BibTeX
@article{MontesMonsalve2025,
  author = {Montes-Monsalve, Jorge and Bernal-Correa, Roberto and Morales-Acevedo, Arturo and Pulzara-Mora, Álvaro},
  title = {Study of the structural and optical properties of CuInSe₂ thin films obtained by RF sputtering as a function of the deposition temperature},
  journal = {Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales},
  year = {2025},
  volume = {49},
  number = {192},
  pages = {532--545},
  doi = {10.18257/raccefyn.3225}
}
Kostenlos starten →