Inverse Kinematics via Acceleration-Level Quadratic Programming and Sliding Mode Control of an Aerial Manipulator for Crop Sampling
Journal of Robotics and Control (JRC) · 25.01.2026 · 6 (6) · 3088-3098
DOI: 10.18196/jrc.v6i6.28121 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Robotics and Control (JRC), online erschienen am 25.01.2026. Verfasst von Ismat Meslouli und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
Recent advances in Unmanned Aerial Vehicles (UAVs) for Precision Agriculture have evolved from performing passive tasks, such as monitoring, mapping, and inspection, to active tasks including harvesting, crop sampling, and insect trap deployment. These new applications were carried out through the integration of robotic arms attached to the base of the platform, thereby forming unmanned aerial manipulators (UAMs). However, UAMs encounter several challenges related to the inverse kinematics problem ensuring a precise trajectory and motion under platform constraints and dynamic coupling. In this paper, the objective is to achieve a precise grasping of a plant sample for ex-situ analysis using a quadcopter equipped with a two-degree-of-freedom robotic arm. The main contribution is the development of an accelerationlevel quadratic programming (QP) approach to solve inverse kinematics and to minimize the end-effector tracking error by incorporating joint constraints, self-collision avoidance, and UAV orientation constraints, thereby exploiting the system’s redundancy. The coupled dynamics of the vehicle are formulated using the Euler-Lagrange formalism and a Sliding Mode Controller based on the super twisting algorithm is employed to ensure trajectory robustness and accuracy, while reducing chattering effects. The simulation results demonstrate high tracking accuracy the precision of (RMSEqp = 10−6m) in end-effector trajectory accuracy, with convergence achieved in 3 seconds and a 88% reduction in chattering compared to conventional SMC methods. Comparative analysis against hierarchical QP methods confirms superior trajectory precision and disturbance rejection. These contributions will enable crop collection tasks to be carried out accurately and with high stability and robustness.
Zitieren
APA
Meslouli, I., Bensalah, C., Choukchou-Braham, A., & Brahim, C. (2026). Inverse Kinematics via Acceleration-Level Quadratic Programming and Sliding Mode Control of an Aerial Manipulator for Crop Sampling. Journal of Robotics and Control (JRC), 6(6), 3088-3098. https://doi.org/10.18196/jrc.v6i6.28121
Vancouver
Meslouli I, Bensalah C, Choukchou-Braham A, Brahim C. Inverse Kinematics via Acceleration-Level Quadratic Programming and Sliding Mode Control of an Aerial Manipulator for Crop Sampling. Journal of Robotics and Control (JRC). 2026;6(6):3088-3098. doi:10.18196/jrc.v6i6.28121
BibTeX
@article{Meslouli2026,
author = {Meslouli, Ismat and Bensalah, Choukri and Choukchou-Braham, Amal and Brahim, Cherki},
title = {Inverse Kinematics via Acceleration-Level Quadratic Programming and Sliding Mode Control of an Aerial Manipulator for Crop Sampling},
journal = {Journal of Robotics and Control (JRC)},
year = {2026},
volume = {6},
number = {6},
pages = {3088--3098},
doi = {10.18196/jrc.v6i6.28121}
}
EUVIMED