EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Implementation of Adaptive Hysteresis-Band Current Control for Bidirectional H-Bridge DC-DC Converter

Dedet Candra Riawan, Heri Suryoatmojo, Alwy Muhammad Ravi, Adel A. Elbaset

Journal of Robotics and Control (JRC) · 26.01.2026 · 6 (6) · 3099-3113

DOI: 10.18196/jrc.v6i6.27096 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Robotics and Control (JRC), online erschienen am 26.01.2026. Verfasst von Dedet Candra Riawan und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The substantial adoption of electric vehicles (EVs) has the potential to disrupt the power grid due to uncontrolled charging. A promising solution is Vehicle-to-Grid (V2G) technology, which allows EVs to return surplus energy to the grid to maintain reliability. However, a key challenge is developing a bidirectional converter with a rapid response that can also maintain a constant switching frequency to avoid harmonic disturbances. This study introduces an innovative adaptive hysteresis bandwidth current control method for H-bridge converters. This method provides a rapid and precise response to dynamic current and voltage fluctuations while maintaining a constant switching frequency for the MOSFET. The adaptive bandwidth values are mathematically derived from converter principles and implemented via a lookup table in a microcontroller. The simulation results showed a response time of less than 1 millisecond without overshoot. Experimental validation demonstrated the system’s efficacy in maintaining a constant switching frequency under dynamic changes. In charging mode, the average frequency was 14.88 kHz (with a range of 0.79 kHz), and the efficiency was 85.74%, while the fixed hysteresis band has a frequency variation of 14.26 kHz to 20.66 kHz (with a range of 6.37 kHz). In discharge mode, the average frequency was 16.62 kHz (with a range of 0.33 kHz), the efficiency was 77.40%, and the fixed bandwidth is approximately 2.3 kHz on frequency from 15.82 kHz to 18.12 kHz. With adaptive control, the frequency change range is successfully constant with a small range.

Zitieren

APA

Riawan, D. C., Suryoatmojo, H., Ravi, A. M., & Elbaset, A. A. (2026). Implementation of Adaptive Hysteresis-Band Current Control for Bidirectional H-Bridge DC-DC Converter. Journal of Robotics and Control (JRC), 6(6), 3099-3113. https://doi.org/10.18196/jrc.v6i6.27096

Vancouver

Riawan DC, Suryoatmojo H, Ravi AM, Elbaset AA. Implementation of Adaptive Hysteresis-Band Current Control for Bidirectional H-Bridge DC-DC Converter. Journal of Robotics and Control (JRC). 2026;6(6):3099-3113. doi:10.18196/jrc.v6i6.27096

BibTeX
@article{Riawan2026,
  author = {Riawan, Dedet Candra and Suryoatmojo, Heri and Ravi, Alwy Muhammad and Elbaset, Adel A.},
  title = {Implementation of Adaptive Hysteresis-Band Current Control for Bidirectional H-Bridge DC-DC Converter},
  journal = {Journal of Robotics and Control (JRC)},
  year = {2026},
  volume = {6},
  number = {6},
  pages = {3099--3113},
  doi = {10.18196/jrc.v6i6.27096}
}
Kostenlos starten →