EUVIMEDEUVIMED entdecken
Crossref

Two methods of drying eucalyptus wood after impregnation with silver nanoparticles

Guilherme Valcorte, Roberta Rodrigues Roubuste, Talita Baldin, Kássya Melissa Oliveira de Souza, Laura Hoffman de Oliveira, Elio José Santini

Scientia Agraria Paranaensis · 30.09.2023 · 01-08

DOI: 10.18188/sap.v22.32629 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Scientia Agraria Paranaensis, online erschienen am 30.09.2023. Verfasst von Guilherme Valcorte und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Today there is exponential growth in the use of wood from the Eucalyptus genus in the wood industries. Given its importance in the forestry and wood marketing industry, there is a clear need to implement technologies that provide better quality wood and improved drying processes. Because of this, the objective of this study is to evaluate two methods of drying Eucalyptus grandis wood after impregnation with silver nanoparticles. To this end, logs of this species were used, which after making the test specimens and impregnation with silver nanoparticles of 40 and 100 ppm, they were subjected to drying in a climate-controlled chamber, with an average temperature of 20°C and relative humidity of 65%, and a laboratory oven with forced circulation at a constant temperature of 60°C, for subsequent moisture content analyses, drying rate and defects. The results showed that there was a greater loss of moisture in those pieces with an impregnation of 40 ppm when drying in an oven and air-conditioned chamber, as well as a higher drying rate in an oven. Furthermore, there was a higher incidence of defects in wood impregnated with 100 ppm and dried in an oven, with those impregnated with 40 ppm and dried in the same method presenting lower values than the control. The specific mass obtained average values similar to those referenced in the literature for the species worked. From the results of the present study, it was possible to conclude that the impregnation of silver nanoparticles brings drying benefits to Eucalyptus grandis wood.

Zitieren

APA

Valcorte, G., Roubuste, R. R., Baldin, T., Souza, K. M. O. D., Oliveira, L. H. D., & Santini, E. J. (2023). Two methods of drying eucalyptus wood after impregnation with silver nanoparticles. Scientia Agraria Paranaensis, 01-08. https://doi.org/10.18188/sap.v22.32629

Vancouver

Valcorte G, Roubuste RR, Baldin T, Souza KMOD, Oliveira LHD, Santini EJ. Two methods of drying eucalyptus wood after impregnation with silver nanoparticles. Scientia Agraria Paranaensis. 2023:01-08. doi:10.18188/sap.v22.32629

BibTeX
@article{Valcorte2023,
  author = {Valcorte, Guilherme and Roubuste, Roberta Rodrigues and Baldin, Talita and Souza, Kássya Melissa Oliveira de and Oliveira, Laura Hoffman de and Santini, Elio José},
  title = {Two methods of drying eucalyptus wood after impregnation with silver nanoparticles},
  journal = {Scientia Agraria Paranaensis},
  year = {2023},
  pages = {01--08},
  doi = {10.18188/sap.v22.32629}
}
Kostenlos starten →