EUVIMEDEUVIMED entdecken
Crossref

A cylindrical path planning approach for additive manufacturing of revolved components

Audelia Gumarus Dharmawan, Gim Song Soh

Materials Science in Additive Manufacturing · 2022

DOI: 10.18063/msam.v1i1.3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science in Additive Manufacturing, 2022. Verfasst von Audelia Gumarus Dharmawan und 1 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Depositing on inclined cylindrical surfaces has recently gained interest due to its potential for directly employing feedstock that forms part of the printed structure. In this paper, we present our approach to perform cylindrical path planning through converting a planar slicing data structure into a universal 3D polar data structure. This has the advantage of using off-the-shelf slicing software and adapting it for cylindrical path planning. Our approach is capable of generating cylindrical print paths of various patterns such as linear raster, circular raster, hybrid contour, and zigzag path. We demonstrate the capability of the approach to planning cylindrical print paths for two different revolved components employing these three different printing patterns. Actual printing experiments and tensile tests of the cylindrical part using wire-arc additive manufacturing were conducted and reported. It was found that they yield an average tensile strength that matches the strength of the 4340 feedstock.

Zitieren

APA

Dharmawan, A. G., & Soh, G. S. (2022). A cylindrical path planning approach for additive manufacturing of revolved components. Materials Science in Additive Manufacturing. https://doi.org/10.18063/msam.v1i1.3

Vancouver

Dharmawan AG, Soh GS. A cylindrical path planning approach for additive manufacturing of revolved components. Materials Science in Additive Manufacturing. 2022. doi:10.18063/msam.v1i1.3

BibTeX
@article{Dharmawan2022,
  author = {Dharmawan, Audelia Gumarus and Soh, Gim Song},
  title = {A cylindrical path planning approach for additive manufacturing of revolved components},
  journal = {Materials Science in Additive Manufacturing},
  year = {2022},
  doi = {10.18063/msam.v1i1.3}
}
Kostenlos starten →