EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Development of a Multi-Material 3D Printer for Functional Anatomic Models

Laszlo Jaksa, Dieter Pahr, Gernot Kronreif, Andrea Lorenz

International Journal of Bioprinting · 02.08.2024 · 7 (4) · 420

DOI: 10.18063/ijb.v7i4.420 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 02.08.2024. Verfasst von Laszlo Jaksa und 3 weiteren Autor:innen. Beteiligte Einrichtung: Austrian Center for Medical Innovation and Technology (ACMIT Gmbh), Viktor-Kaplan-Strasse 2/A, 2700 Wiener Neustadt, Austria. Die Arbeit wurde bisher 38-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Anatomic models are important in medical education and pre-operative planning as they help students or doctors prepare for real scenarios in a risk-free way. Several experimental anatomic models were made with additive manufacturing techniques to improve geometric, radiological, or mechanical realism. However, reproducing the mechanical behavior of soft tissues remains a challenge. To solve this problem, multi-material structuring of soft and hard materials was proposed in this study, and a three-dimensional (3D) printer was built to make such structuring possible. The printer relies on extrusion to deposit certain thermoplastic and silicone rubber materials. Various objects were successfully printed for testing the feasibility of geometric features such as thin walls, infill structuring, overhangs, and multi-material interfaces. Finally, a small medical image-based ribcage model was printed as a proof of concept for anatomic model printing. The features enabled by this printer offer a promising outlook on mimicking the mechanical properties of various soft tissues.

Schlagwörter

Stichwörter der Autor:innen

Anatomic modelsMulti-material 3D printingSilicone 3D printingSoft tissues

Autor:innen und Institutionen

  • Austrian Center for Medical Innovation and Technology (ACMIT Gmbh), Viktor-Kaplan-Strasse 2/A, 2700 Wiener Neustadt, Austria.
  • Technical University of Vienna, Institute of Lightweight Design and Structural Biomechanics, Object 8, Gumpendorfer Strasse 7, 1060 Vienna, Austria.
  • Karl Landsteiner University of Health Sciences, Department of Anatomy and Biomechanics, Dr.-Karl-Dorrek-Strasse 30, 3500 Krems an der Donau, Austria.

Zitieren

APA

Jaksa, L., Pahr, D., Kronreif, G., & Lorenz, A. (2024). Development of a Multi-Material 3D Printer for Functional Anatomic Models. International Journal of Bioprinting, 7(4), 420. https://doi.org/10.18063/ijb.v7i4.420

Vancouver

Jaksa L, Pahr D, Kronreif G, Lorenz A. Development of a Multi-Material 3D Printer for Functional Anatomic Models. International Journal of Bioprinting. 2024;7(4):420. doi:10.18063/ijb.v7i4.420

BibTeX
@article{Jaksa2024,
  author = {Jaksa, Laszlo and Pahr, Dieter and Kronreif, Gernot and Lorenz, Andrea},
  title = {Development of a Multi-Material 3D Printer for Functional Anatomic Models},
  journal = {International Journal of Bioprinting},
  year = {2024},
  volume = {7},
  number = {4},
  pages = {420},
  doi = {10.18063/ijb.v7i4.420}
}
Kostenlos starten →