EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Fabrication of biomimetic placental barrier structures within a microfluidic device utilizing two-photon polymerization

Denise Mandt, Peter Gruber, Marica Markovic, Maximillian Tromayer, Mario Rothbauer, Sebastian Rudi Adam Kratz, Syed Faheem Ali, Jasper Van Hoorick, Wolfgang Holnthoner, Severin Mühleder, Peter Dubruel, Sandra Van Vlierberghe und 3 weitere

International Journal of Bioprinting · 02.08.2024 · 4 (2) · 144

DOI: 10.18063/ijb.v4i2.144 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 02.08.2024. Verfasst von Denise Mandt und 14 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Materials Science and Technology, TU Wien, Vienna Austria. Die Arbeit wurde bisher 93-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The placenta is a transient organ, essential for development and survival of the unborn fetus. It interfaces the body of the pregnant woman with the unborn child and secures transport of endogenous and exogenous substances. Maternal and fetal blood are thereby separated at any time, by the so-called placental barrier. Current in vitro approaches fail to model this multifaceted structure, therefore research in the field of placental biology is particularly challenging. The present study aimed at establishing a novel model, simulating placental transport and its implications on development, in a versatile but reproducible way. The basal membrane was replicated using a gelatin-based material, closely mimicking the composition and properties of the natural extracellular matrix. The microstructure was produced by using a high-resolution 3D printing method – the two-photon polymerization (2PP). In order to structure gelatin by 2PP, its primary amines and carboxylic acids are modified with methacrylamides and methacrylates (GelMOD-AEMA), respectively. High-resolution structures in the range of a few micrometers were produced within the intersection of a customized microfluidic device, separating the x-shaped chamber into two isolated cell culture compartments. Human umbilical-vein endothelial cells (HUVEC) seeded on one side of this membrane simulate the fetal compartment while human choriocarcinoma cells, isolated from placental tissue (BeWo B30) mimic the maternal syncytium. This barrier model in combination with native flow profiles can be used to mimic the microenvironment of the placenta, investigating different pharmaceutical, clinical and biological scenarios. As proof-of-principle, this bioengineered placental barrier was used for the investigation of transcellular transport processes. While high molecular weight substances did not permeate, smaller molecules in the size of glucose were able to diffuse through the barrier in a time-depended manner. We envision to apply this bioengineered placental barrier for pathophysiological research, where altered nutrient transport is associated with health risks for the fetus.

Schlagwörter

Stichwörter der Autor:innen

high resolution 3D printingmicrostructuremodelplacental barriertwo-photon polymerization

Autor:innen und Institutionen

  • Institute of Materials Science and Technology, TU Wien, Vienna Austria.
  • Austrian Cluster for Tissue Regeneration, Austria.
  • Institute of Applied Synthetic Chemistry, TU Wien, Vienna Austria.
  • Polymer Chemistry and Biomaterials Group, Centre of Macromolecular Chemistry, Ghent University, Ghent, Belgium.
  • Brussels Photonics, Department of Applied Physics and Photonics, Vrije Universiteit Brussel, Brussels, Belgium.
  • Ludwig Boltzmann Institute of Experimental and Clinical Traumatology, Vienna, Austria.

Zitieren

APA

Mandt, D., Gruber, P., Markovic, M., Tromayer, M., Rothbauer, M., Kratz, S. R. A., Ali, S. F., Hoorick, J. V., Holnthoner, W., Mühleder, S., Dubruel, P., Vlierberghe, S. V., Ertl, P., Liska, R., & Ovsianikov, A. (2024). Fabrication of biomimetic placental barrier structures within a microfluidic device utilizing two-photon polymerization. International Journal of Bioprinting, 4(2), 144. https://doi.org/10.18063/ijb.v4i2.144

Vancouver

Mandt D, Gruber P, Markovic M, Tromayer M, Rothbauer M, Kratz SRA, et al. Fabrication of biomimetic placental barrier structures within a microfluidic device utilizing two-photon polymerization. International Journal of Bioprinting. 2024;4(2):144. doi:10.18063/ijb.v4i2.144

BibTeX
@article{Mandt2024,
  author = {Mandt, Denise and Gruber, Peter and Markovic, Marica and Tromayer, Maximillian and Rothbauer, Mario and Kratz, Sebastian Rudi Adam and Ali, Syed Faheem and Hoorick, Jasper Van and Holnthoner, Wolfgang and Mühleder, Severin and Dubruel, Peter and Vlierberghe, Sandra Van and Ertl, Peter and Liska, Robert and Ovsianikov, Aleksandr},
  title = {Fabrication of biomimetic placental barrier structures within a microfluidic device utilizing two-photon polymerization},
  journal = {International Journal of Bioprinting},
  year = {2024},
  volume = {4},
  number = {2},
  pages = {144},
  doi = {10.18063/ijb.v4i2.144}
}
Kostenlos starten →