EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Machine learning and 3D bioprinting

Jie Sun, Kai Yao, Jia An, Linzhi Jing, Kaizhu Huang, Dejian Huang

International Journal of Bioprinting · 01.08.2024 · 9 (4) · 717

DOI: 10.18063/ijb.717 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 01.08.2024. Verfasst von Jie Sun und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Advanced Technology, Xi'an Jiaotong-Liverpool University, Suzhou, China. Die Arbeit wurde bisher 64-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the growing number of biomaterials and printing technologies, bioprinting has brought about tremendous potential to fabricate biomimetic architectures or living tissue constructs. To make bioprinting and bioprinted constructs more powerful, machine learning (ML) is introduced to optimize the relevant processes, applied materials, and mechanical/biological performances. The objectives of this work were to collate, analyze, categorize, and summarize published articles and papers pertaining to ML applications in bioprinting and their impact on bioprinted constructs, as well as the directions of potential development. From the available references, both traditional ML and deep learning (DL) have been applied to optimize the printing process, structural parameters, material properties, and biological/ mechanical performance of bioprinted constructs. The former uses features extracted from image or numerical data as inputs in prediction model building, and the latter uses the image directly for segmentation or classification model building. All of these studies present advanced bioprinting with a stable and reliable printing process, desirable fiber/droplet diameter, and precise layer stacking, and also enhance the bioprinted constructs with better design and cell performance. The current challenges and outlooks in developing process–material–performance models are highlighted, which may pave the way for revolutionizing bioprinting technologies and bioprinted construct design.

Schlagwörter

Stichwörter der Autor:innen

BiomaterialsBioprinted constructsBioprintingDeep learningMachine learning

Autor:innen und Institutionen

  • School of Advanced Technology, Xi'an Jiaotong-Liverpool University, Suzhou, China.
  • School of Engineering, University of Liverpool, Liverpool, UK.
  • Singapore Centre for 3D Printing, Nanyang Technological University, Singapore.
  • Centre for Healthcare Education, Entrepreneurship and Research at SUTD, Singapore University of Technology and Design, Singapore.
  • National University of Singapore Suzhou Research Institute, Suzhou, China.
  • Data Science Research Centre, Duke Kunshan University, Kunshan, China.

Zitieren

APA

Sun, J., Yao, K., An, J., Jing, L., Huang, K., & Huang, D. (2024). Machine learning and 3D bioprinting. International Journal of Bioprinting, 9(4), 717. https://doi.org/10.18063/ijb.717

Vancouver

Sun J, Yao K, An J, Jing L, Huang K, Huang D. Machine learning and 3D bioprinting. International Journal of Bioprinting. 2024;9(4):717. doi:10.18063/ijb.717

BibTeX
@article{Sun2024,
  author = {Sun, Jie and Yao, Kai and An, Jia and Jing, Linzhi and Huang, Kaizhu and Huang, Dejian},
  title = {Machine learning and 3D bioprinting},
  journal = {International Journal of Bioprinting},
  year = {2024},
  volume = {9},
  number = {4},
  pages = {717},
  doi = {10.18063/ijb.717}
}
Kostenlos starten →