EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Combination of 3D printing and electrospinning to develop chitin/gelatin/PVA scaffolds

Teresa Carranza, Jone Uranga, Ainhoa Irastorza, Ander Izeta, Pedro Guerrero, Koro de la Caba

International Journal of Bioprinting · 06.03.2023 · 9 (3) · 701

DOI: 10.18063/ijb.701 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 06.03.2023. Verfasst von Teresa Carranza und 5 weiteren Autor:innen. Beteiligte Einrichtung: BIOMAT Research Group, University of the Basque Country (UPV/EHU), Escuela de Ingeniería de Gipuzkoa, Plaza de Europa 1, 20018 Donostia-San Sebastián…. Die Arbeit wurde bisher 16-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, novel scaffolds based on natural polymers were developed by combining 3D printing (3DP) and electrospinning (ES) techniques. ES ink was prepared with gelatin and poly(vinyl alcohol) (PVA), while 3DP ink was prepared with gelatin and chitin. Different biopolymers were used to confer unique properties to each ink and obtain a multilayered scaffold suitable for tissue regeneration. First, gelatin is able to exhibit the characteristics needed for both inks since gelatin chains contain arginineglycine-aspartic (RGD) motifs, an important sequence in the promotion of cell adhesion, which gives gelatin an improved biological behavior in comparison to other polymers. Additionally, PVA was selected for ES ink to facilitate gelatin spinnability, and chitin was incorporated into 3DP ink as reinforcement to provide mechanical support and protection to the overall design. In this work, chitin was extracted from fruit fly pupae. The high extraction yield and purity of the chitin obtained from the fruit fly pupae confirmed that this pupa is an alternative source to produce chitin. Once the chitin was characterized, both inks were prepared and rheological analysis was carried out in order to confirm the shear thinning behavior required for additive manufacturing processes. The combination of 3DP and ES processes resulted in porous scaffolds, which were proven biocompatible, highlighting their potential for biomedical applications.

Schlagwörter

Stichwörter der Autor:innen

3D printingChitinElectrospinningFruit fly pupaeGelatinScaffolds

Autor:innen und Institutionen

  • BIOMAT Research Group, University of the Basque Country (UPV/EHU), Escuela de Ingeniería de Gipuzkoa, Plaza de Europa 1, 20018 Donostia-San Sebastián, Spain.
  • Biodonostia Health Research Institute, Tissue Engineering Group, P° Dr. Beguiristain s/n, 20014, Donostia-San Sebastián, Spain.
  • BCMaterials, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940, Leioa, Spain.
  • Proteinmat materials SL, Avenida de Tolosa 72, 20018 Donostia-San Sebastián, Spain.

Zitieren

APA

Carranza, T., Uranga, J., Irastorza, A., Izeta, A., Guerrero, P., & de la Caba, K. (2023). Combination of 3D printing and electrospinning to develop chitin/gelatin/PVA scaffolds. International Journal of Bioprinting, 9(3), 701. https://doi.org/10.18063/ijb.701

Vancouver

Carranza T, Uranga J, Irastorza A, Izeta A, Guerrero P, de la Caba K. Combination of 3D printing and electrospinning to develop chitin/gelatin/PVA scaffolds. International Journal of Bioprinting. 2023;9(3):701. doi:10.18063/ijb.701

BibTeX
@article{Carranza2023,
  author = {Carranza, Teresa and Uranga, Jone and Irastorza, Ainhoa and Izeta, Ander and Guerrero, Pedro and de la Caba, Koro},
  title = {Combination of 3D printing and electrospinning to develop chitin/gelatin/PVA scaffolds},
  journal = {International Journal of Bioprinting},
  year = {2023},
  volume = {9},
  number = {3},
  pages = {701},
  doi = {10.18063/ijb.701}
}
Kostenlos starten →