Effect of Concentration and Temperature of TiO2-Al2O3 Hybrid Nanofluid on the Corrosion Rate of Aluminum Radiator
Journal of Mechanical Engineering Science and Technology (JMEST) · 23.07.2026 · 10 (1) · 180-196
DOI: 10.17977/2580-2402.1236 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Mechanical Engineering Science and Technology (JMEST), online erschienen am 23.07.2026. Verfasst von Ratna Monasari und 6 weiteren Autor:innen.
Abstract (Originalsprache)
Corrosion of aluminum radiators can reduce cooling system reliability and shorten service life in automotive applications. This study examines the effect of TiO2-Al2O3 hybrid nanofluid concentration and temperature on the corrosion rate of commercially available aluminum radiator material. Hybrid nanoparticles with a TiO2-Al2O3 mass ratio of 50:50 were dispersed in distilled water at concentrations of 0.6 wt.%, 0.8 wt.%, and 1.0 wt.%. Corrosion behavior was evaluated using a 14-day accelerated immersion test at 60°C and 80°C, and the corrosion rate was determined using the gravimetric mass loss method. The results showed that the corrosion response was not linearly proportional to nanoparticle concentration. At 60°C, the lowest corrosion rate was observed at 0.6 wt.% with 0.000049 mm/year, corresponding to an 88.84% lower value compared with the room temperature distilled water baseline. At 80°C, the lowest corrosion rate was observed at 0.8 wt.% with 0.000027 mm/year, corresponding to a 93.85% lower value compared with the same baseline. In contrast, the 1.0 wt.% concentration produced higher corrosion rates, especially at 80°C, where the corrosion rate reached 0.003983 mm/year. This behavior may be associated with changes in particle distribution or suspension stability at higher nanoparticle loading, although further dispersion, electrochemical, and surface characterization is required to confirm the mechanism. Macroscopic surface observation showed visible localized corrosion features that qualitatively supported the gravimetric trend. These findings provide preliminary experimental evidence that the corrosion response of aluminum radiator material in TiO2-Al2O3 hybrid nanofluid depends on both nanoparticle concentration and immersion temperature within the tested range.
Zitieren
APA
Monasari, R., Ramadhan, R. M., Farida, N. N., Firdaus, A. H., Aji, S. K., Winoko, Y. A., & Hidayatullah, R. A. (2026). Effect of Concentration and Temperature of TiO2-Al2O3 Hybrid Nanofluid on the Corrosion Rate of Aluminum Radiator. Journal of Mechanical Engineering Science and Technology (JMEST), 10(1), 180-196. https://doi.org/10.17977/2580-2402.1236
Vancouver
Monasari R, Ramadhan RM, Farida NN, Firdaus AH, Aji SK, Winoko YA, et al. Effect of Concentration and Temperature of TiO2-Al2O3 Hybrid Nanofluid on the Corrosion Rate of Aluminum Radiator. Journal of Mechanical Engineering Science and Technology (JMEST). 2026;10(1):180-196. doi:10.17977/2580-2402.1236
BibTeX
@article{Monasari2026,
author = {Monasari, Ratna and Ramadhan, Rizky Maulana and Farida, Nike Nur and Firdaus, Ahmad Hanif and Aji, Supa Kusuma and Winoko, Yuniarto Agus and Hidayatullah, Rizkyansyah Alif},
title = {Effect of Concentration and Temperature of TiO2-Al2O3 Hybrid Nanofluid on the Corrosion Rate of Aluminum Radiator},
journal = {Journal of Mechanical Engineering Science and Technology (JMEST)},
year = {2026},
volume = {10},
number = {1},
pages = {180--196},
doi = {10.17977/2580-2402.1236}
}
EUVIMED