EUVIMEDEUVIMED entdecken
Crossref

Numerical Simulation of Centrifugal Pump Performance under Impeller Blade and Suction Diameter Variations

Gunawan Budi Santoso, Susanto -, Akhmad Nuriyanis, Anang Budhi Nugroho, Rizka Noor Miftakhul Ulum, Suyono -

Journal of Mechanical Engineering Science and Technology (JMEST) · 17.07.2026 · 10 (1) · 129-141

DOI: 10.17977/2580-2402.1235 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanical Engineering Science and Technology (JMEST), online erschienen am 17.07.2026. Verfasst von Gunawan Budi Santoso und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of this study is to model variations in pump geometry to obtain optimal performance under the effects of cavitation. The resulting geometric variation models were then simulated using ANSYS Fluent software. The first geometric variation model used a standard 5-blade impeller with suction pipe diameter variations of 2, 2 ½, 2 ¾, 3, 3 ¼, 3 ½, and 4 inches. The second geometric variation model for simulation used a standard 3-inch suction pipe with impeller blade variations of 3, 4, 5, 6, 7, 8, and 9. The simulation results indicated that the number of blades without changes in the inlet diameter did not affect the static pressure. Meanwhile, variations in the inlet diameter geometry caused changes in static pressure. With a standard inlet diameter geometry of 3 inches, a 5-blade impeller produced a flow rate of 0.041 m³/s and a head of 186.74 m. With the smallest inlet diameter variation of 2 inches and a fixed number of 5 impeller blades, the flow rate was 0.020 m³/s, and the head was 85.14 m. With the largest inlet diameter variation of 4 inches, the flow rate was 0.069 m³/s, and the head was 428.79 m. Under standard operating conditions with a 3-inch inlet, the impeller blade count resulted in a head of 186.74 m. The lowest head was obtained with a blade count variation of 4, with a value of 173.33 m. The highest head value was obtained with a blade count variation of 191.95 m.

Zitieren

APA

Santoso, G. B., -, S., Nuriyanis, A., Nugroho, A. B., Ulum, R. N. M., & -, S. (2026). Numerical Simulation of Centrifugal Pump Performance under Impeller Blade and Suction Diameter Variations. Journal of Mechanical Engineering Science and Technology (JMEST), 10(1), 129-141. https://doi.org/10.17977/2580-2402.1235

Vancouver

Santoso GB, - S, Nuriyanis A, Nugroho AB, Ulum RNM, - S. Numerical Simulation of Centrifugal Pump Performance under Impeller Blade and Suction Diameter Variations. Journal of Mechanical Engineering Science and Technology (JMEST). 2026;10(1):129-141. doi:10.17977/2580-2402.1235

BibTeX
@article{Santoso2026,
  author = {Santoso, Gunawan Budi and -, Susanto and Nuriyanis, Akhmad and Nugroho, Anang Budhi and Ulum, Rizka Noor Miftakhul and -, Suyono},
  title = {Numerical Simulation of Centrifugal Pump Performance under Impeller Blade and Suction Diameter Variations},
  journal = {Journal of Mechanical Engineering Science and Technology (JMEST)},
  year = {2026},
  volume = {10},
  number = {1},
  pages = {129--141},
  doi = {10.17977/2580-2402.1235}
}
Kostenlos starten →