EUVIMEDEUVIMED entdecken
Crossref

Chemical Composition Stability of Cu–Sn and Cu–Zn Journal BeChemical Composition Stability of Cu–Sn and Cu–Zn Alloys Fabricated by Sand and Permanent Mold Casting with Nickel Alloying

Erwin Erwin, Didik Sugiyanto, Juan Pratama, Trisna Ardi Wiradinata, Abdul Rachmadhan, Muhammad Fikri Andika

Journal of Mechanical Engineering Science and Technology (JMEST) · 23.07.2026 · 10 (1) · 163-179

DOI: 10.17977/2580-2402.1234 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanical Engineering Science and Technology (JMEST), online erschienen am 23.07.2026. Verfasst von Erwin Erwin und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The processes of moulding and reinforcing chemical elements have a big impact on the balance of chemical composition in copper-based bearing alloys. This has a direct impact on how well the material works. This study examines Cu–Sn alloys produced via sand casting and Cu–Zn alloys fabricated through permanent mould casting, with the incorporation of nickel, which remains uncommon. The objective was to examine the variations in the equilibrium of the chemical composition and the performance potential of the bearing alloy metal when subjected to different casting techniques and nickel concentrations ranging from 0% to 4%. Some of the methods used are experimental casting, checking the chemical makeup, checking for weight loss and slag formation, and statistical regression analysis to see how different things are related. The decrease in slag deposition in CuZn occurred in nickel mining by 1-3% with a range of between 19-30%, but for the addition of 4%Ni, the amount of CuZnNi4% slag was 40% less when compared to CuSnNi4%. The increased compositional stability showed a strong correlation in CuSnNi alloys with R2 values = 0.769, when compared with CuZnNi with R2 values = 0.2988. The study's results show that adding nickel makes the elements in the copper matrix more stable and may make them more resistant to wear, even though it lowers the amount of Sn and Pb, which are natural lubricants. These results are useful for making copper-containing materials better by changing how they are cast and the composition of the alloys.

Zitieren

APA

Erwin, E., Sugiyanto, D., Pratama, J., Wiradinata, T. A., Rachmadhan, A., & Andika, M. F. (2026). Chemical Composition Stability of Cu–Sn and Cu–Zn Journal BeChemical Composition Stability of Cu–Sn and Cu–Zn Alloys Fabricated by Sand and Permanent Mold Casting with Nickel Alloying. Journal of Mechanical Engineering Science and Technology (JMEST), 10(1), 163-179. https://doi.org/10.17977/2580-2402.1234

Vancouver

Erwin E, Sugiyanto D, Pratama J, Wiradinata TA, Rachmadhan A, Andika MF. Chemical Composition Stability of Cu–Sn and Cu–Zn Journal BeChemical Composition Stability of Cu–Sn and Cu–Zn Alloys Fabricated by Sand and Permanent Mold Casting with Nickel Alloying. Journal of Mechanical Engineering Science and Technology (JMEST). 2026;10(1):163-179. doi:10.17977/2580-2402.1234

BibTeX
@article{Erwin2026,
  author = {Erwin, Erwin and Sugiyanto, Didik and Pratama, Juan and Wiradinata, Trisna Ardi and Rachmadhan, Abdul and Andika, Muhammad Fikri},
  title = {Chemical Composition Stability of Cu–Sn and Cu–Zn Journal BeChemical Composition Stability of Cu–Sn and Cu–Zn Alloys Fabricated by Sand and Permanent Mold Casting with Nickel Alloying},
  journal = {Journal of Mechanical Engineering Science and Technology (JMEST)},
  year = {2026},
  volume = {10},
  number = {1},
  pages = {163--179},
  doi = {10.17977/2580-2402.1234}
}
Kostenlos starten →