EUVIMEDEUVIMED entdecken
Crossref

Synthesis of Fe-Doped Porous Carbon Catalyst Derived from Coconut Shell Waste using Ferric Nitrate Nonahydrate (Fe(NO3)3.9H2O) as an Iron Precursor

Ilham Lestadi Putra, Sukarni Sukarni, Heru Suryanto

Journal of Mechanical Engineering Science and Technology (JMEST) · 01.09.2026 · 10 (2) · 224-237

DOI: 10.17977/2580-2402.1191 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanical Engineering Science and Technology (JMEST), online erschienen am 01.09.2026. Verfasst von Ilham Lestadi Putra und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Renewable energy from lignocellulosic biomass is a promising alternative to fossil fuels. Coconut shell (CS) waste is a favorable precursor for porous carbon due to its high carbon content, abundance, and non-food nature. However, conventional biochar often has limited surface area and catalytic active sites, hindering its effectiveness as a catalyst. While Fe-based modifications are promising, the use of ferric nitrate-assisted activation of coconut-shell-derived porous carbon remains underexplored. This research focused on developing an Fe-doped porous carbon catalyst from CS via ultrasound-assisted impregnation, followed by activation in a tube furnace. CS biochar was produced through pyrolysis at 550 °C and subsequently impregnated with ferric nitrate nonahydrate (Fe(NO₃)₃·9H₂O) utilizing ultrasonic mixing. The resulting composite was then activated in a tube furnace to synthesize Fe-doped porous carbon. The catalyst created with 2 wt.% Fe(NO₃)₃·9H₂O showed the highest specific surface area of 262.9 m²/g, representing a 55-fold increase compared to untreated biochar. Structural analysis revealed that Fe activation facilitated pore development via Fe-assisted carbon gasification, while the thermal decomposition of CaCO₃ and K₂CO₃ also contributed to pore formation. These structural enhancements are likely to improve catalytic efficiency by promoting deoxygenation during biomass pyrolysis. The results demonstrate an efficient and cost-effective method for synthesizing iron-doped porous carbon catalysts from CS biomass. This process successfully enhances the material's porosity, making it suitable for catalytic biomass conversion applications. The iron-doped porous carbon produced shows promise as a low-cost catalyst for the catalytic pyrolysis and upgrading of biomass-derived bio-oil.

Zitieren

APA

Putra, I. L., Sukarni, S., & Suryanto, H. (2026). Synthesis of Fe-Doped Porous Carbon Catalyst Derived from Coconut Shell Waste using Ferric Nitrate Nonahydrate (Fe(NO3)3.9H2O) as an Iron Precursor. Journal of Mechanical Engineering Science and Technology (JMEST), 10(2), 224-237. https://doi.org/10.17977/2580-2402.1191

Vancouver

Putra IL, Sukarni S, Suryanto H. Synthesis of Fe-Doped Porous Carbon Catalyst Derived from Coconut Shell Waste using Ferric Nitrate Nonahydrate (Fe(NO3)3.9H2O) as an Iron Precursor. Journal of Mechanical Engineering Science and Technology (JMEST). 2026;10(2):224-237. doi:10.17977/2580-2402.1191

BibTeX
@article{Putra2026,
  author = {Putra, Ilham Lestadi and Sukarni, Sukarni and Suryanto, Heru},
  title = {Synthesis of Fe-Doped Porous Carbon Catalyst Derived from Coconut Shell Waste using Ferric Nitrate Nonahydrate (Fe(NO3)3.9H2O) as an Iron Precursor},
  journal = {Journal of Mechanical Engineering Science and Technology (JMEST)},
  year = {2026},
  volume = {10},
  number = {2},
  pages = {224--237},
  doi = {10.17977/2580-2402.1191}
}
Kostenlos starten →