Comparative finite element analysis of the effects of nano- and micro-osteoperforations on mandibular bone
Acta Universitatis Dentistriae et Chirurgiae Maxillofacialis · 15.11.2025 · 3 (3) · 97-102
DOI: 10.17816/uds694236 ↗Kurz gefasst
Fachartikel in der Zeitschrift Acta Universitatis Dentistriae et Chirurgiae Maxillofacialis, online erschienen am 15.11.2025. Verfasst von Roman A. Fadeev und 3 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
BACKGROUND: Although osteoperforation techniques are widely used in orthodontics, the effect of perforation size on stress distribution within mandibular bone and subsequent bone remodeling remains unclear. This study addresses this gap by comparing the effects of nano- and micro-osteoperforations in the mandible using finite element analysis. AIM: This study aimed to evaluate the effects of nano- and micro-osteoperforations on mandibular bone during orthodontic treatment. METHODS: A three-dimensional mandibular model was constructed with crowded incisors and a fixed orthodontic appliance incorporating a Bio Edge 16 × 16 archwire (A form), which is used at the alignment phase. Two types of osteoperforations were simulated: nano-osteoperforations with small diameters (1.1–1.5 mm) and conventional micro-osteoperforations with larger diameters (1.6–2.5 mm). Finite element analysis was used to determine the mechanical response of the bone, including stress and strain levels, at the osteoperforation sites. The resulting data were used to compare the two osteoperforation techniques and substantiate recommendations regarding the most effective approach. RESULTS: Orthodontic treatment with nano-osteoperforations resulted in moderate stress levels in the bone, with maximum values of 43.845 MPa and minimum values of 0.0001349 MPa. In contrast, micro-osteoperforations produced substantially higher stress levels, with maximum and minimum values of 46.81 MPa and 0.00013798 MPa, respectively. Finite element analysis showed that nano-osteoperforations led to a more uniform distribution of mechanical stresses in the bone compared with conventional micro-osteoperforation techniques. CONCLUSION: The results indicate reduced stress levels in the bone when nano-osteoperforations are used, creating favorable conditions for physiological bone remodeling. Thus, nano-osteoperforations represent a promising approach in orthodontic treatment, as they reduce the risk of complications and improve the efficiency of orthodontic tooth movement.
Zitieren
APA
Fadeev, R. A., Shchedrina, T. A., Prozorova, N. V., & Fadeeva, M. R. (2025). Comparative finite element analysis of the effects of nano- and micro-osteoperforations on mandibular bone. Acta Universitatis Dentistriae et Chirurgiae Maxillofacialis, 3(3), 97-102. https://doi.org/10.17816/uds694236
Vancouver
Fadeev RA, Shchedrina TA, Prozorova NV, Fadeeva MR. Comparative finite element analysis of the effects of nano- and micro-osteoperforations on mandibular bone. Acta Universitatis Dentistriae et Chirurgiae Maxillofacialis. 2025;3(3):97-102. doi:10.17816/uds694236
BibTeX
@article{Fadeev2025,
author = {Fadeev, Roman A. and Shchedrina, Tatyana A. and Prozorova, Natalia V. and Fadeeva, Maria R.},
title = {Comparative finite element analysis of the effects of nano- and micro-osteoperforations on mandibular bone},
journal = {Acta Universitatis Dentistriae et Chirurgiae Maxillofacialis},
year = {2025},
volume = {3},
number = {3},
pages = {97--102},
doi = {10.17816/uds694236}
}
EUVIMED