Application of digital technologies for the fabrication of gerostomatological shape-memory implants: a randomized controlled open-label laboratory study
Russian Journal of Dentistry · 22.04.2026 · 30 (2) · 121-130
DOI: 10.17816/dent705003 ↗Kurz gefasst
Fachartikel in der Zeitschrift Russian Journal of Dentistry, online erschienen am 22.04.2026. Verfasst von Maxim M. Romanov und 2 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
BACKGROUND: Placement of standard titanium implants into bone tissue requires sufficient bone volume. The use of a material that is a shape-memory nickel-titanium alloy opens up new possibilities in the planning and fabrication of dental implants in geriatric dentistry. AIM: To develop and test a technological process for manufacturing individual gerostomatological implants from the shape-memory alloy using additive technologies and 3D modeling. METHODS: The study employed 3D modeling, printing on a 3D printer from ashfree plastic, and casting from titanium nickelide. Compliance of geometric parameters (diameter, length) with specified values and the presence of the shape-memory effect were analyzed. In an in vitro laboratory study, 10 samples of nickel-titanium alloy shape-memory implants were divided into two groups (n = 5): casting using a standard technique (group 1) and casting in a gas-protected environment (group 2). Dimensional accuracy was assessed using a caliper, and preservation of the shapememory effect was evaluated through deformation and heating. Due to the absence of result variability between the groups (complete compliance with specified parameters in group 2 versus complete non-compliance in group 1), no statistical processing was applied; the analysis was descriptive and comparative in nature. RESULTS: Precision single-phase gerostomatological shape-memory implants were developed and fabricated (n = 10). It was established that samples from group 1, cast using the standard technique, did not meet the properties of the TN-10 alloy and were prone to fracture upon deformation; they lacked the shape-memory effect. They also did not match the dimensions of the models designed and printed on the 3D printer. Samples from group 2, cast in a gasprotected environment, complied with the properties of the TN-10 alloy; the shapememory elements returned to their original configuration at a temperature of 36°C. The dimensions of the group 2 samples precisely reproduced the dimensions of the models designed and printed on the 3D printer. CONCLUSION: The study presents important information on a new biomechanically and biochemically compatible shape-memory nickel-titanium material. Using additive technologies and 3D modeling, along with a modern casting technique, it is possible to create highly precise models of individual single-phase gerostomatological implants with the capability for bicortical fixation. Such implants are intended for use in complex clinical situations associated with severe jawbone atrophy, aiming to improve quality of life and address the medical and social challenges of geriatric dentistry.
Zitieren
APA
Romanov, M. M., Khafizov, I. R., & Khafizov, R. G. (2026). Application of digital technologies for the fabrication of gerostomatological shape-memory implants: a randomized controlled open-label laboratory study. Russian Journal of Dentistry, 30(2), 121-130. https://doi.org/10.17816/dent705003
Vancouver
Romanov MM, Khafizov IR, Khafizov RG. Application of digital technologies for the fabrication of gerostomatological shape-memory implants: a randomized controlled open-label laboratory study. Russian Journal of Dentistry. 2026;30(2):121-130. doi:10.17816/dent705003
BibTeX
@article{Romanov2026,
author = {Romanov, Maxim M. and Khafizov, Irek R. and Khafizov, Rais G.},
title = {Application of digital technologies for the fabrication of gerostomatological shape-memory implants: a randomized controlled open-label laboratory study},
journal = {Russian Journal of Dentistry},
year = {2026},
volume = {30},
number = {2},
pages = {121--130},
doi = {10.17816/dent705003}
}
EUVIMED