EUVIMEDEUVIMED entdecken
Crossref

Investigation of the Utilization Potential of Tobacco Plant Waste Ash in Ceramic Bodies

Öznur Yıldırım, Nihal Turan Gül

Bitlis Eren Üniversitesi Fen Bilimleri Dergisi · 24.03.2026 · 15 (1) · 300-311

DOI: 10.17798/bitlisfen.1801494 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bitlis Eren Üniversitesi Fen Bilimleri Dergisi, online erschienen am 24.03.2026. Verfasst von Öznur Yıldırım und 1 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Gefördert von: Adıyaman University Scientific Research Projects (BAP) Commission.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to evaluate the potential use of tobacco plant waste ash as an alternative raw material in ceramic bodies. Although various agricultural residues such as rice husk ash, olive waste, and coffee husk have been widely investigated in ceramics, studies specifically focusing on the effects of tobacco ash in ceramic bodies remain extremely limited. In this research, tobacco waste obtained from Adıyaman (Turkey) was characterized using XRF, and ICP-MS analyses. Grog-based and casting-slip-based bodies were formulated with 0–25 wt% ash additions, fired at 1160 °C, and examined in terms of water absorption, linear shrinkage, color changes, and surface morphology. The results indicate that low to moderate ash additions (3–10 wt%) promoted sintering, controlled porosity, and produced more stable microstructures. The lowest water absorption values were obtained in samples ST10 (15.75%) and DT0 (19.8%). However, higher ash additions (20–25 wt%) significantly increased porosity, with water absorption rising to 31.3% in DT25, indicating reduced densification efficiency. Total shrinkage exhibited an irregular trend in grog-based bodies due to the non-plastic nature of chamotte. Overall, the findings demonstrate that tobacco ash can be incorporated into ceramic bodies at optimal levels of 10–15 wt%, within which acceptable water absorption, controlled microstructural behavior, and desirable surface characteristics can be achieved. Thus, tobacco ash represents both an environmentally sustainable raw material alternative and an innovative functional additive capable of modifying ceramic body properties.

Förderung

  • Adıyaman University Scientific Research Projects (BAP) Commission

Zitieren

APA

Yıldırım, Ö., & Gül, N. T. (2026). Investigation of the Utilization Potential of Tobacco Plant Waste Ash in Ceramic Bodies. Bitlis Eren Üniversitesi Fen Bilimleri Dergisi, 15(1), 300-311. https://doi.org/10.17798/bitlisfen.1801494

Vancouver

Yıldırım Ö, Gül NT. Investigation of the Utilization Potential of Tobacco Plant Waste Ash in Ceramic Bodies. Bitlis Eren Üniversitesi Fen Bilimleri Dergisi. 2026;15(1):300-311. doi:10.17798/bitlisfen.1801494

BibTeX
@article{Yldrm2026,
  author = {Yıldırım, Öznur and Gül, Nihal Turan},
  title = {Investigation of the Utilization Potential of Tobacco Plant Waste Ash in Ceramic Bodies},
  journal = {Bitlis Eren Üniversitesi Fen Bilimleri Dergisi},
  year = {2026},
  volume = {15},
  number = {1},
  pages = {300--311},
  doi = {10.17798/bitlisfen.1801494}
}
Kostenlos starten →