GEOMECHANICAL ANALYSIS TO DETERMINE THE MAXIMUM LIMIT OF WATER INJECTION IN THE KEUTAPANGAN FORMATION, “ZA” FIELD, NORTH SUMATRA BASIN
Rudarsko-geološko-naftni zbornik · 2026 · 41 (2) · 1-14
DOI: 10.17794/rgn.2026.2.1 ↗Kurz gefasst
Fachartikel in der Zeitschrift Rudarsko-geološko-naftni zbornik, 2026. Verfasst von Zahra Adinda Billqish und 2 weiteren Autor:innen.
Abstract (Originalsprache)
The “ZA” Field is located in the North Sumatra Basin and is predominantly affected by geopressure issues. As such, geomechanical analysis is crucial during drilling operations to mitigate potential hazards. The geomechanical analysis conducted in this study utilizes a 1D Mechanical Earth Model (MEM), which includes the following components: over burden stress, pore pressure, rock strength, rock elastic properties, and minimum horizontal stress. The data used in this analysis were obtained from the following sources: wireline logging for all geomechanical calculations, pressure tests to validate pore pressure values, fracture gradient data to validate the minimum horizontal stress curve, step-rate tests to determine the injection pressure limit, and well reports. The “ZA” Field exhibits a complex geopressure regime, ranging from underpressure to overpressure, with transitional zones that combine both conditions. Overpressure is primarily attributed to loading mechanisms, while underpressure results from historical fluid extraction during previous drilling activities. Lithological analysis indicates that the reservoir consists of shaly sand and fine-grained formations. Due to the shallow burial depth, these rocks remain poorly consolidated, resulting in a narrow safe injection window above the pore pressure. This constraint is exemplified by one well, where the maximum allowable injection pressure was 7.63 MPa, with only a 2 MPa margin above the pore pressure.
Zitieren
APA
Billqish, Z. A., Wicaksono, A., & Sismanto, S. (2026). GEOMECHANICAL ANALYSIS TO DETERMINE THE MAXIMUM LIMIT OF WATER INJECTION IN THE KEUTAPANGAN FORMATION, “ZA” FIELD, NORTH SUMATRA BASIN. Rudarsko-geološko-naftni zbornik, 41(2), 1-14. https://doi.org/10.17794/rgn.2026.2.1
Vancouver
Billqish ZA, Wicaksono A, Sismanto S. GEOMECHANICAL ANALYSIS TO DETERMINE THE MAXIMUM LIMIT OF WATER INJECTION IN THE KEUTAPANGAN FORMATION, “ZA” FIELD, NORTH SUMATRA BASIN. Rudarsko-geološko-naftni zbornik. 2026;41(2):1-14. doi:10.17794/rgn.2026.2.1
BibTeX
@article{Billqish2026,
author = {Billqish, Zahra Adinda and Wicaksono, Andika and Sismanto, Sismanto},
title = {GEOMECHANICAL ANALYSIS TO DETERMINE THE MAXIMUM LIMIT OF WATER INJECTION IN THE KEUTAPANGAN FORMATION, “ZA” FIELD, NORTH SUMATRA BASIN},
journal = {Rudarsko-geološko-naftni zbornik},
year = {2026},
volume = {41},
number = {2},
pages = {1--14},
doi = {10.17794/rgn.2026.2.1}
}
EUVIMED