EUVIMEDEUVIMED entdecken
Crossref

An Ultralow-Noise Phantom-Powered Microphone Amplifier

Enrique M. Spinelli

Journal of the Audio Engineering Society · 06.11.2026 · 74 (11) · 877-886

DOI: 10.17743/jaes.2026.0312 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the Audio Engineering Society, online erschienen am 06.11.2026. Verfasst von Enrique M. Spinelli.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Low-noise amplifier design inherently conflicts with low power consumption. This trade-off becomes particularly critical in phantom-powered audio equipment, where the available power is severely limited and must be carefully preserved. An optimized design for achieving ultralow-noise amplifiers with a noise floor below 1 nV/√Hz while operating under phantom power is presented. It is shown that, when the total collector current is limited, paralleling N transistors to reduce amplifier noise is effective only up to a certain number of devices, beyond which increasing N no longer improves noise performance. As an example, a double-balanced microphone amplifier was designed, built, and tested. It exhibits an input-referred noise density of 0.6 nV/√Hz over the 20 Hz–20 kHz bandwidth (−141 dBV or −139 dBu) while consuming less than 8.5 mA. A noise floor level of 0.55 nV/√Hz (−140 dBu) can be achieved by accepting a phantom current of 9.5 mA. A detailed circuit analysis and design equations are provided to adapt the circuit to different requirements and design constraints.

Zitieren

APA

Spinelli, E. M. (2026). An Ultralow-Noise Phantom-Powered Microphone Amplifier. Journal of the Audio Engineering Society, 74(11), 877-886. https://doi.org/10.17743/jaes.2026.0312

Vancouver

Spinelli EM. An Ultralow-Noise Phantom-Powered Microphone Amplifier. Journal of the Audio Engineering Society. 2026;74(11):877-886. doi:10.17743/jaes.2026.0312

BibTeX
@article{Spinelli2026,
  author = {Spinelli, Enrique M.},
  title = {An Ultralow-Noise Phantom-Powered Microphone Amplifier},
  journal = {Journal of the Audio Engineering Society},
  year = {2026},
  volume = {74},
  number = {11},
  pages = {877--886},
  doi = {10.17743/jaes.2026.0312}
}
Kostenlos starten →