GRADATION ASYMMETRY AS A DESIGN PARAMETER FOR FUNCTIONALLY GRADED PIEZOELECTRIC TIMOSHENKO BEAMS UNDER LORD-SHULMAN THERMAL SHOCK
Far East Journal of Mathematical Sciences (FJMS) · 2027 · 144 (1)
DOI: 10.17654/77251136 ↗Kurz gefasst
Fachartikel in der Zeitschrift Far East Journal of Mathematical Sciences (FJMS), 2027. Verfasst von Nawal A. Alshehri.
Abstract (Originalsprache)
The transient response of Timoshenko beam made of a functionally graded piezoelectric material (FGPM) to an end thermal shock is examined within Lord-Shulman generalized thermoelasticity for power, sigmoid, exponential and symmetric through-thickness gradation laws of a PZT-4/PZT-5H pair. The fully coupled model, including pyroelectricity, is solved exactly in the axial coordinate through a quadratic eigenvalue formulation in the Laplace domain, and verified against an independent finite-difference scheme. Three dimensionless asymmetry indices are defined from the section coefficients. It is proved that any gradation symmetric about the midplane suppresses the deflection and the induced potential identically. In this case, the electrode charge equals that of a homogeneous beam of the face material, exactly in the uncoupled limit and to within the small thermoelastic coupling otherwise. For asymmetric laws, the peak deflection follows the empirical rule \(w_{\text {max }} \approx\left|\eta_{M}\right|(a-b \bar{V})\), with a coefficient of determination of 0.995 and a maximum relative error of 0.035, and keeps this form for other slenderness ratios, rise times and beam thicknesses. At fixed mean composition, the peak potential is proportional to the piezoelectric index. The sigmoid law gives the largest asymmetry, raising deflection and potential to about one and a half times those of the best power law profile. Once bending develops, asymmetry increases the peak surface stress, slightly under near-Fourier conduction but by a factor of up to 1.44 when the thermal and elastic wave speeds coincide. The physical scales and the validity of the continuum model are discussed.
Zitieren
APA
Alshehri, N. A. (2027). GRADATION ASYMMETRY AS A DESIGN PARAMETER FOR FUNCTIONALLY GRADED PIEZOELECTRIC TIMOSHENKO BEAMS UNDER LORD-SHULMAN THERMAL SHOCK. Far East Journal of Mathematical Sciences (FJMS), 144(1). https://doi.org/10.17654/77251136
Vancouver
Alshehri NA. GRADATION ASYMMETRY AS A DESIGN PARAMETER FOR FUNCTIONALLY GRADED PIEZOELECTRIC TIMOSHENKO BEAMS UNDER LORD-SHULMAN THERMAL SHOCK. Far East Journal of Mathematical Sciences (FJMS). 2027;144(1). doi:10.17654/77251136
BibTeX
@article{Alshehri2027,
author = {Alshehri, Nawal A.},
title = {GRADATION ASYMMETRY AS A DESIGN PARAMETER FOR FUNCTIONALLY GRADED PIEZOELECTRIC TIMOSHENKO BEAMS UNDER LORD-SHULMAN THERMAL SHOCK},
journal = {Far East Journal of Mathematical Sciences (FJMS)},
year = {2027},
volume = {144},
number = {1},
doi = {10.17654/77251136}
}
EUVIMED